diff --git a/.gitignore b/.gitignore
new file mode 100644
index 0000000..e188864
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1,31 @@
+1Password/
+Chiaki/
+Code/
+Creality/
+GIMP/
+Thunar/
+VirtualBox/
+YouTube Music/
+Yubico/
+calibre/
+cura/
+dconf/
+firefox/
+google-chrome/
+gopass/
+gh/
+hcloud/
+keybase/
+mc/
+mimeapps.list
+nvim/plugged/
+obs-studio/
+pavucontrol.ini
+pipewire/
+systemd/user/default.target.wants/
+vesktop/
+vlc/
+wavemon/
+weechat/
+wireshark/
+xfce4/
diff --git a/btop/btop.conf b/btop/btop.conf
new file mode 100644
index 0000000..8ff8a02
--- /dev/null
+++ b/btop/btop.conf
@@ -0,0 +1,248 @@
+#? Config file for btop v. 1.4.0
+
+#* Name of a btop++/bpytop/bashtop formatted ".theme" file, "Default" and "TTY" for builtin themes.
+#* Themes should be placed in "../share/btop/themes" relative to binary or "$HOME/.config/btop/themes"
+color_theme = "Default"
+
+#* If the theme set background should be shown, set to False if you want terminal background transparency.
+theme_background = False
+
+#* Sets if 24-bit truecolor should be used, will convert 24-bit colors to 256 color (6x6x6 color cube) if false.
+truecolor = True
+
+#* Set to true to force tty mode regardless if a real tty has been detected or not.
+#* Will force 16-color mode and TTY theme, set all graph symbols to "tty" and swap out other non tty friendly symbols.
+force_tty = False
+
+#* Define presets for the layout of the boxes. Preset 0 is always all boxes shown with default settings. Max 9 presets.
+#* Format: "box_name:P:G,box_name:P:G" P=(0 or 1) for alternate positions, G=graph symbol to use for box.
+#* Use whitespace " " as separator between different presets.
+#* Example: "cpu:0:default,mem:0:tty,proc:1:default cpu:0:braille,proc:0:tty"
+presets = "cpu:1:default,proc:0:default cpu:0:default,mem:0:default,net:0:default cpu:0:block,net:0:tty"
+
+#* Set to True to enable "h,j,k,l,g,G" keys for directional control in lists.
+#* Conflicting keys for h:"help" and k:"kill" is accessible while holding shift.
+vim_keys = False
+
+#* Rounded corners on boxes, is ignored if TTY mode is ON.
+rounded_corners = True
+
+#* Default symbols to use for graph creation, "braille", "block" or "tty".
+#* "braille" offers the highest resolution but might not be included in all fonts.
+#* "block" has half the resolution of braille but uses more common characters.
+#* "tty" uses only 3 different symbols but will work with most fonts and should work in a real TTY.
+#* Note that "tty" only has half the horizontal resolution of the other two, so will show a shorter historical view.
+graph_symbol = "braille"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_cpu = "default"
+
+# Graph symbol to use for graphs in gpu box, "default", "braille", "block" or "tty".
+graph_symbol_gpu = "default"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_mem = "default"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_net = "default"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_proc = "default"
+
+#* Manually set which boxes to show. Available values are "cpu mem net proc" and "gpu0" through "gpu5", separate values with whitespace.
+shown_boxes = "cpu mem net proc"
+
+#* Update time in milliseconds, recommended 2000 ms or above for better sample times for graphs.
+update_ms = 1000
+
+#* Processes sorting, "pid" "program" "arguments" "threads" "user" "memory" "cpu lazy" "cpu direct",
+#* "cpu lazy" sorts top process over time (easier to follow), "cpu direct" updates top process directly.
+proc_sorting = "cpu direct"
+
+#* Reverse sorting order, True or False.
+proc_reversed = False
+
+#* Show processes as a tree.
+proc_tree = False
+
+#* Use the cpu graph colors in the process list.
+proc_colors = True
+
+#* Use a darkening gradient in the process list.
+proc_gradient = True
+
+#* If process cpu usage should be of the core it's running on or usage of the total available cpu power.
+proc_per_core = False
+
+#* Show process memory as bytes instead of percent.
+proc_mem_bytes = True
+
+#* Show cpu graph for each process.
+proc_cpu_graphs = True
+
+#* Use /proc/[pid]/smaps for memory information in the process info box (very slow but more accurate)
+proc_info_smaps = False
+
+#* Show proc box on left side of screen instead of right.
+proc_left = False
+
+#* (Linux) Filter processes tied to the Linux kernel(similar behavior to htop).
+proc_filter_kernel = False
+
+#* In tree-view, always accumulate child process resources in the parent process.
+proc_aggregate = False
+
+#* Sets the CPU stat shown in upper half of the CPU graph, "total" is always available.
+#* Select from a list of detected attributes from the options menu.
+cpu_graph_upper = "Auto"
+
+#* Sets the CPU stat shown in lower half of the CPU graph, "total" is always available.
+#* Select from a list of detected attributes from the options menu.
+cpu_graph_lower = "Auto"
+
+#* If gpu info should be shown in the cpu box. Available values = "Auto", "On" and "Off".
+show_gpu_info = "Auto"
+
+#* Toggles if the lower CPU graph should be inverted.
+cpu_invert_lower = True
+
+#* Set to True to completely disable the lower CPU graph.
+cpu_single_graph = False
+
+#* Show cpu box at bottom of screen instead of top.
+cpu_bottom = False
+
+#* Shows the system uptime in the CPU box.
+show_uptime = True
+
+#* Show cpu temperature.
+check_temp = True
+
+#* Which sensor to use for cpu temperature, use options menu to select from list of available sensors.
+cpu_sensor = "Auto"
+
+#* Show temperatures for cpu cores also if check_temp is True and sensors has been found.
+show_coretemp = True
+
+#* Set a custom mapping between core and coretemp, can be needed on certain cpus to get correct temperature for correct core.
+#* Use lm-sensors or similar to see which cores are reporting temperatures on your machine.
+#* Format "x:y" x=core with wrong temp, y=core with correct temp, use space as separator between multiple entries.
+#* Example: "4:0 5:1 6:3"
+cpu_core_map = ""
+
+#* Which temperature scale to use, available values: "celsius", "fahrenheit", "kelvin" and "rankine".
+temp_scale = "celsius"
+
+#* Use base 10 for bits/bytes sizes, KB = 1000 instead of KiB = 1024.
+base_10_sizes = False
+
+#* Show CPU frequency.
+show_cpu_freq = True
+
+#* Draw a clock at top of screen, formatting according to strftime, empty string to disable.
+#* Special formatting: /host = hostname | /user = username | /uptime = system uptime
+clock_format = "%X"
+
+#* Update main ui in background when menus are showing, set this to false if the menus is flickering too much for comfort.
+background_update = True
+
+#* Custom cpu model name, empty string to disable.
+custom_cpu_name = ""
+
+#* Optional filter for shown disks, should be full path of a mountpoint, separate multiple values with whitespace " ".
+#* Begin line with "exclude=" to change to exclude filter, otherwise defaults to "most include" filter. Example: disks_filter="exclude=/boot /home/user".
+disks_filter = ""
+
+#* Show graphs instead of meters for memory values.
+mem_graphs = True
+
+#* Show mem box below net box instead of above.
+mem_below_net = False
+
+#* Count ZFS ARC in cached and available memory.
+zfs_arc_cached = True
+
+#* If swap memory should be shown in memory box.
+show_swap = True
+
+#* Show swap as a disk, ignores show_swap value above, inserts itself after first disk.
+swap_disk = True
+
+#* If mem box should be split to also show disks info.
+show_disks = True
+
+#* Filter out non physical disks. Set this to False to include network disks, RAM disks and similar.
+only_physical = True
+
+#* Read disks list from /etc/fstab. This also disables only_physical.
+use_fstab = True
+
+#* Setting this to True will hide all datasets, and only show ZFS pools. (IO stats will be calculated per-pool)
+zfs_hide_datasets = False
+
+#* Set to true to show available disk space for privileged users.
+disk_free_priv = False
+
+#* Toggles if io activity % (disk busy time) should be shown in regular disk usage view.
+show_io_stat = True
+
+#* Toggles io mode for disks, showing big graphs for disk read/write speeds.
+io_mode = False
+
+#* Set to True to show combined read/write io graphs in io mode.
+io_graph_combined = False
+
+#* Set the top speed for the io graphs in MiB/s (100 by default), use format "mountpoint:speed" separate disks with whitespace " ".
+#* Example: "/mnt/media:100 /:20 /boot:1".
+io_graph_speeds = ""
+
+#* Set fixed values for network graphs in Mebibits. Is only used if net_auto is also set to False.
+net_download = 100
+
+net_upload = 100
+
+#* Use network graphs auto rescaling mode, ignores any values set above and rescales down to 10 Kibibytes at the lowest.
+net_auto = True
+
+#* Sync the auto scaling for download and upload to whichever currently has the highest scale.
+net_sync = True
+
+#* Starts with the Network Interface specified here.
+net_iface = ""
+
+#* Show battery stats in top right if battery is present.
+show_battery = True
+
+#* Which battery to use if multiple are present. "Auto" for auto detection.
+selected_battery = "BAT0"
+
+#* Show power stats of battery next to charge indicator.
+show_battery_watts = True
+
+#* Set loglevel for "~/.config/btop/btop.log" levels are: "ERROR" "WARNING" "INFO" "DEBUG".
+#* The level set includes all lower levels, i.e. "DEBUG" will show all logging info.
+log_level = "WARNING"
+
+#* Measure PCIe throughput on NVIDIA cards, may impact performance on certain cards.
+nvml_measure_pcie_speeds = True
+
+#* Horizontally mirror the GPU graph.
+gpu_mirror_graph = True
+
+#* Custom gpu0 model name, empty string to disable.
+custom_gpu_name0 = ""
+
+#* Custom gpu1 model name, empty string to disable.
+custom_gpu_name1 = ""
+
+#* Custom gpu2 model name, empty string to disable.
+custom_gpu_name2 = ""
+
+#* Custom gpu3 model name, empty string to disable.
+custom_gpu_name3 = ""
+
+#* Custom gpu4 model name, empty string to disable.
+custom_gpu_name4 = ""
+
+#* Custom gpu5 model name, empty string to disable.
+custom_gpu_name5 = ""
diff --git a/displays/lock b/displays/lock
new file mode 100755
index 0000000..82e2143
--- /dev/null
+++ b/displays/lock
@@ -0,0 +1,7 @@
+#!/bin/bash
+
+#scrot screenshot.png -m -e 'mv $f /tmp/'
+#convert /tmp/screenshot.png -blur 0x7 /tmp/screenshotblur.png
+#i3lock -t -i /tmp/screenshotblur.png
+
+i3lock -t -i $(find $HOME/pictures/lockscreen -type f | shuf -n1)
diff --git a/displays/lock_wallpaper.jpg b/displays/lock_wallpaper.jpg
new file mode 100644
index 0000000..73ff949
Binary files /dev/null and b/displays/lock_wallpaper.jpg differ
diff --git a/displays/lock_wallpaper.png b/displays/lock_wallpaper.png
new file mode 100644
index 0000000..6c6855e
Binary files /dev/null and b/displays/lock_wallpaper.png differ
diff --git a/displays/lock_wallpaper_ctos.png b/displays/lock_wallpaper_ctos.png
new file mode 100644
index 0000000..491dddb
Binary files /dev/null and b/displays/lock_wallpaper_ctos.png differ
diff --git a/displays/motherbase-setup b/displays/motherbase-setup
new file mode 100755
index 0000000..734f193
--- /dev/null
+++ b/displays/motherbase-setup
@@ -0,0 +1,35 @@
+#!/bin/bash
+
+PLACE=$1
+INTERNAL=$(xrandr | grep eDP | cut -d' ' -f1)
+
+case $PLACE in
+  single)
+    for display in $(xrandr | grep -v '^ ' | grep -v '^Screen' | grep ' connected' | cut -d' ' -f1)
+    do
+      xrandr --output "${display}" --off
+    done
+    xrandr --output "${INTERNAL}" --mode 1920x1080
+    systemctl --user stop polybar@hdmi.service
+    systemctl --user stop polybar@external.service
+    systemctl --user restart polybar@internal.service
+    ;;
+
+  home)
+    xrandr --output "${INTERNAL}" --off
+    xrandr --output DP1-2 --primary --auto
+    xrandr --output DP2-1 --left-of DP2-2 --auto
+    systemctl --user stop polybar@hdmi.service
+    systemctl --user restart polybar@external.service
+    systemctl --user restart polybar@internal.service
+    ;;
+
+  work)
+    xrandr --output "${INTERNAL}" --off
+    xrandr --output HDMI2 --auto --right-of DP1-2
+    xrandr --output DP1-2 --auto --primary
+    systemctl --user restart polybar@hdmi.service
+    systemctl --user restart polybar@external.service
+    systemctl --user stop polybar@internal.service
+    ;;
+esac
diff --git a/displays/outerhaven-setup b/displays/outerhaven-setup
new file mode 100755
index 0000000..a435f74
--- /dev/null
+++ b/displays/outerhaven-setup
@@ -0,0 +1,26 @@
+#!/bin/bash
+
+PLACE=$1
+INTERNAL=$(xrandr | grep eDP | cut -d' ' -f1)
+
+case $PLACE in
+  single)
+    for display in $(xrandr | grep -v '^ ' | grep -v '^Screen' | grep ' connected' | cut -d' ' -f1)
+    do
+      xrandr --output "${display}" --off
+    done
+    xrandr --output "${INTERNAL}" --mode 1920x1080
+    systemctl --user stop polybar@hdmi.service
+    systemctl --user stop polybar@external.service
+    systemctl --user restart polybar@internal.service
+    ;;
+
+  work)
+    xrandr --output "${INTERNAL}" --off
+    xrandr --output HDMI-2 --auto --right-of DP-1-2
+    xrandr --output DP-1-2 --auto --primary
+    systemctl --user restart polybar@hdmi.service
+    systemctl --user restart polybar@external.service
+    systemctl --user stop polybar@internal.service
+    ;;
+esac
diff --git a/displays/shadowmoses-setup b/displays/shadowmoses-setup
new file mode 100755
index 0000000..d4c2e74
--- /dev/null
+++ b/displays/shadowmoses-setup
@@ -0,0 +1,58 @@
+#!/bin/bash
+
+set -x
+
+PLACE=$1
+
+#xrandr | grep -A1 'DisplayPort.* connected' | while read -r display
+#do
+#  echo $display | tail -n1 | grep 2560
+#  if [ $? -eq 0 ]
+#  then
+#    WQHD=$(echo $display | head -n1 | cut -d" " -f1)
+#  else
+#    FULLHD=$(echo $display | head -n1 | cut -d" " -f1)
+#  fi
+#done
+INTERNAL=$(xrandr | grep eDP | cut -d' ' -f1)
+QUADHD_RIGHT=DisplayPort-0
+QUADHD_LEFT=DisplayPort-1
+
+#deactivate()
+
+
+case $PLACE in
+  single)
+    for display in $(xrandr --query | grep -v ' connected' | cut -d' ' -f1)
+    do
+      if [ $display == "eDP" ]
+      then
+        true
+      else
+        xrandr --output "${display}" --off
+      fi
+    done
+    xrandr --output "${INTERNAL}" --auto --primary
+    systemctl --user restart polybar@main.service
+    systemctl --user stop polybar@quadhd_left.service
+    systemctl --user stop polybar@quadhd_right.service
+    ;;
+
+  home)
+    xrandr --output "${INTERNAL}" --off
+    xrandr --output "${QUADHD_LEFT}" --auto --primary
+    xrandr --output "${QUADHD_RIGHT}" --auto --right-of "${QUADHD_LEFT}"
+    systemctl --user stop polybar@main.service
+    systemctl --user restart polybar@quadhd_left.service
+    systemctl --user restart polybar@quadhd_right.service
+    ;;
+
+  home-single)
+    xrandr --output "${INTERNAL}" --off
+    xrandr --output "${QUADHD_RIGHT}" --off
+    xrandr --output "${QUADHD_LEFT}" --auto --primary
+    systemctl --user stop polybar@main.service
+    systemctl --user restart polybar@quadhd_left.service
+    systemctl --user stop polybar@quadhd_right.service
+    ;;
+esac
diff --git a/displays/wallpaper_dedsec.jpg b/displays/wallpaper_dedsec.jpg
new file mode 100644
index 0000000..81c40b8
Binary files /dev/null and b/displays/wallpaper_dedsec.jpg differ
diff --git a/displays/wallpaper_login.png b/displays/wallpaper_login.png
new file mode 100644
index 0000000..a589b43
Binary files /dev/null and b/displays/wallpaper_login.png differ
diff --git a/feh/motherbase-random b/feh/motherbase-random
new file mode 100755
index 0000000..82d34a0
--- /dev/null
+++ b/feh/motherbase-random
@@ -0,0 +1,11 @@
+#!/bin/bash
+
+THEME=cyberpunk
+ROTATED=$(xrandr --listmonitors | grep '1080.*x1920')
+
+if [[ $ROTATED ]]
+  then
+    feh --bg-scale $(find $HOME/pictures/wallpaper/${THEME} -type f | shuf -n1) --bg-scale $(find $HOME/pictures/wallpaper/${THEME} -type f | shuf -n1) --bg-scale $(find $HOME/pictures/wallpaper/${THEME}_rotated -type f | shuf -n1) 
+  else
+    feh --bg-scale -z $HOME/pictures/wallpaper/${THEME}
+fi
diff --git a/feh/outerhaven-random b/feh/outerhaven-random
new file mode 100755
index 0000000..2ffb9dc
--- /dev/null
+++ b/feh/outerhaven-random
@@ -0,0 +1,11 @@
+#!/bin/bash
+
+THEME=pirate_ships
+ROTATED=$(xrandr --listmonitors | grep '1080.*x1920')
+
+if [[ $ROTATED ]]
+  then
+    feh --bg-scale $(find $HOME/pictures/wallpaper/${THEME}_rotated -type f | shuf -n1) --bg-scale $(find $HOME/pictures/wallpaper/${THEME} -type f | shuf -n1)
+  else
+    feh --bg-scale -z $HOME/pictures/wallpaper/${THEME}
+fi
diff --git a/feh/shadowmoses-random b/feh/shadowmoses-random
new file mode 100755
index 0000000..74daa63
--- /dev/null
+++ b/feh/shadowmoses-random
@@ -0,0 +1,11 @@
+#! /bin/bash
+
+THEME=shoujo_ai
+ROTATED=$(xrandr --listmonitors | grep '1080.*x1920')
+
+if [[ $ROTATED ]]
+  then
+    feh --bg-scale $(find $HOME/pictures/wallpaper/${THEME} -type f | shuf -n1) --bg-scale $(find $HOME/pictures/wallpaper/${THEME} -type f | shuf -n1) --bg-scale $(find $HOME/pictures/wallpaper/${THEME}_rotated -type f | shuf -n1)
+  else
+    feh --bg-fill -z $HOME/pictures/wallpaper/${THEME}
+fi
diff --git a/fish/completions/etherlight.fish b/fish/completions/etherlight.fish
new file mode 100644
index 0000000..40fa3e2
--- /dev/null
+++ b/fish/completions/etherlight.fish
@@ -0,0 +1,17 @@
+
+function __fish_._etherlight.py_complete
+    set -x _ARGCOMPLETE 1
+    set -x _ARGCOMPLETE_DFS \t
+    set -x _ARGCOMPLETE_IFS \n
+    set -x _ARGCOMPLETE_SUPPRESS_SPACE 1
+    set -x _ARGCOMPLETE_SHELL fish
+    set -x COMP_LINE (commandline -p)
+    set -x COMP_POINT (string length (commandline -cp))
+    set -x COMP_TYPE
+    if set -q _ARC_DEBUG
+        ./etherlight.py 8>&1 9>&2 1>&9 2>&1
+    else
+        ./etherlight.py 8>&1 9>&2 1>/dev/null 2>&1
+    end
+end
+complete --path ./etherlight.py -f -a '(__fish_._etherlight.py_complete)'
diff --git a/ghostty/config b/ghostty/config
new file mode 100644
index 0000000..9fd7558
--- /dev/null
+++ b/ghostty/config
@@ -0,0 +1,19 @@
+font-family = "Iosevka Term"
+font-family-bold = "Iosevka Term"
+font-family-italic = "Iosevka Term"
+font-family-bold-italic = "Iosevka Term"
+
+font-size = 11
+
+cursor-style = bar
+cursor-style-blink = false
+
+background-opacity = 0.85
+
+window-decoration = false
+
+focus-follows-mouse = true
+
+theme = MaterialDesignColors
+
+keybind = ctrl+shift+f=toggle_split_zoom
diff --git a/git/config b/git/config
new file mode 100644
index 0000000..593a27c
--- /dev/null
+++ b/git/config
@@ -0,0 +1,23 @@
+[pull]
+  rebase = true
+[user]
+  email = git@m3philis.com
+  name = m3philis
+  signingkey = 8ED634A8618F69F0C0D423AC21F947246992CF4D
+[commit]
+	gpgSign = true
+[pager]
+  branch = false
+[alias]
+  ap = add -p
+  chk = checkout
+  cm = commit
+  ps = push
+  po = "!f() { \
+          git push --set-upstream origin $(git branch --show-current); \
+        }; f"
+  pl = pull
+[init]
+	defaultBranch = main
+[push]
+	autoSetupRemote = true
diff --git a/i3/config b/i3/config
new file mode 100755
index 0000000..ada2914
--- /dev/null
+++ b/i3/config
@@ -0,0 +1,215 @@
+# This file has been auto-generated by i3-config-wizard(1).
+# It will not be overwritten, so edit it as you like.
+#
+# Should you change your keyboard layout somewhen, delete
+# this file and re-run i3-config-wizard(1).
+#
+
+# i3 config file (v4)
+#
+# Please see http://i3wm.org/docs/userguide.html for a complete reference!
+
+set $mod Mod4
+
+default_border pixel 0
+gaps inner 6
+#hide_edge_borders both
+focus_follows_mouse yes
+workspace_auto_back_and_forth yes
+force_display_urgency_hint 500 ms
+
+# color
+client.focused          #4c94af #4c94af #191919 #4c94af
+client.focused_inactive #333333 #5f676a #ffffff #484e50
+client.unfocused        #333333 #222222 #888888 #292d2e
+client.urgent           #DD1111 #DD1111 #191919 #DD1111
+
+# Font for window titles. Will also be used by the bar unless a different font
+# is used in the bar {} block below. ISO 10646 = Unicode
+#font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
+font pango:Iosevka Term Regular 10
+# The font above is very space-efficient, that is, it looks good, sharp and
+# clear in small sizes. However, if you need a lot of unicode glyphs or
+# right-to-left text rendering, you should instead use pango for rendering and
+# chose a FreeType font, such as:
+# font pango:DejaVu Sans Mono 10
+
+# windows rules
+for_window [class="org.remmina.Remmina"] floating enable
+for_window [class="feh"] floating enable
+for_window [class="Pavucontrol"] floating enable
+for_window [class="Slack"] floating enable
+for_window [class="discord"] floating enable
+for_window [all] border pixel 0
+
+# Use Mouse+$mod to drag floating windows to their wanted position
+floating_modifier $mod
+
+# start a terminal
+bindsym $mod+Return exec ghostty
+
+# kill focused window
+bindsym $mod+Shift+q kill
+
+# Make the currently focused window a scratchpad
+bindsym $mod+Shift+minus move scratchpad
+
+# Show the first scratchpad window
+bindsym $mod+minus scratchpad show
+
+# start dmenu (a program launcher)
+bindsym $mod+r exec "bemenu-run -b --nb '#191919' --sb '#191919' --nf '#4c94af' --sf '#4E9A06' --fn 'Iosevka Term 11'"
+
+# change focus
+bindsym $mod+j focus left
+bindsym $mod+k focus down
+bindsym $mod+i focus up
+bindsym $mod+l focus right
+
+# alternatively, you can use the cursor keys:
+bindsym $mod+Left focus left
+bindsym $mod+Down focus down
+bindsym $mod+Up focus up
+bindsym $mod+Right focus right
+bindsym Mod1+Tab focus right
+bindsym Mod1+Shift+Tab focus left
+
+# move focused window
+#bindsym $mod+Shift+j move left
+#bindsym $mod+Shift+k move down
+#bindsym $mod+Shift+i move up
+#bindsym $mod+Shift+l move right
+
+# alternatively, you can use the cursor keys:
+bindsym $mod+Shift+Left move left
+bindsym $mod+Shift+Down move down
+bindsym $mod+Shift+Up move up
+bindsym $mod+Shift+Right move right
+#bindsym $mod+Tab move scratchpad
+#bindsym $mod+Shift+Tab scratchpad show
+
+# split in horizontal orientation
+bindsym $mod+h split h
+
+# split in vertical orientation
+bindsym $mod+v split v
+
+# enter fullscreen mode for the focused container
+bindsym $mod+f fullscreen
+
+# change container layout (stacked, tabbed, toggle split)
+bindsym $mod+s layout stacking
+bindsym $mod+w layout tabbed
+bindsym $mod+e layout toggle split
+
+# toggle tiling / floating
+bindsym $mod+Shift+space floating toggle
+
+# change focus between tiling / floating windows
+bindsym $mod+Tab focus mode_toggle
+
+# focus the parent container
+bindsym $mod+a focus parent
+
+# focus the child container
+#bindsym $mod+d focus child
+
+# switch to workspace
+bindsym $mod+1 workspace 1
+bindsym $mod+2 workspace 2
+bindsym $mod+3 workspace 3
+bindsym $mod+4 workspace 4
+bindsym $mod+5 workspace 5
+bindsym $mod+6 workspace 6
+bindsym $mod+7 workspace 7
+bindsym $mod+8 workspace 8
+bindsym $mod+9 workspace 9
+bindsym $mod+u workspace prev_on_output
+bindsym $mod+o workspace next_on_output
+
+# move focused container to workspace
+bindsym $mod+Shift+1 move container to workspace 1
+bindsym $mod+Shift+2 move container to workspace 2
+bindsym $mod+Shift+3 move container to workspace 3
+bindsym $mod+Shift+4 move container to workspace 4
+bindsym $mod+Shift+5 move container to workspace 5
+bindsym $mod+Shift+6 move container to workspace 6
+bindsym $mod+Shift+7 move container to workspace 7
+bindsym $mod+Shift+8 move container to workspace 8
+bindsym $mod+Shift+9 move container to workspace 9
+
+# move focused workspace to screen
+bindsym $mod+Shift+i move workspace to output down
+bindsym $mod+Shift+k move workspace to output up
+bindsym $mod+Shift+u move workspace to output left
+bindsym $mod+Shift+o move workspace to output right
+
+# reload the configuration file
+bindsym $mod+Shift+c reload
+# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
+bindsym $mod+Shift+r restart
+# exit i3 (logs you out of your X session)
+bindsym $mod+Shift+x exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"
+
+# Pressing left will shrink the window’s width.
+# Pressing right will grow the window’s width.
+# Pressing up will shrink the window’s height.
+# Pressing down will grow the window’s height.
+bindsym $mod+Ctrl+j resize shrink width 10 px or 10 ppt
+bindsym $mod+Ctrl+i resize grow height 10 px or 10 ppt
+bindsym $mod+Ctrl+k resize shrink height 10 px or 10 ppt
+bindsym $mod+Ctrl+l resize grow width 10 px or 10 ppt
+
+# Keybindings for Background
+#bindsym $mod+Shift+n exec "~/.config/feh/random"
+bindsym $mod+Shift+n exec "~/.config/feh/$(hostname)-random"
+
+# Lockscreen
+bindsym $mod+Shift+l exec "~/.config/displays/lock"
+bindsym $mod+Shift+s exec "systemctl suspend; ~/.config/displays/lock"
+
+# Pass Passmenu
+bindsym $mod+p exec "~/.local/bin/passmenu-user -b"
+bindsym $mod+Shift+p exec "~/.local/bin/passmenu -b"
+
+# Screenshot
+bindsym $mod+XF86WakeUp exec "scrot '%Y-%m-%d_%T.png' -e 'mv $f ~/pictures/screenshots'"
+
+# Screens
+bindsym XF86Display exec "~/.config/displays/$(hostname)-setup single"
+bindsym Mod1+$mod+1 exec "~/.config/displays/$(hostname)-setup single"
+bindsym Mod1+$mod+2 exec "~/.config/displays/$(hostname)-setup home"
+bindsym Mod1+$mod+3 exec "~/.config/displays/$(hostname)-setup home-single"
+bindsym Control+Mod1+End exec "ddcutil --display 2 setvcp 0x60 0x0f"
+bindsym Control+Mod1+Home exec "ddcutil --display 1 setvcp 0x60 0x0f"
+
+# Brightness
+bindsym XF86MonBrightnessDown exec "light -U 10"
+bindsym XF86MonBrightnessUp exec "light -A 10"
+
+# Sound
+bindsym XF86AudioRaiseVolume exec "$HOME/.local/bin/pulseaudio increase"
+bindsym XF86AudioLowerVolume exec "$HOME/.local/bin/pulseaudio decrease"
+bindsym XF86AudioMute exec "$HOME/.local/bin/pulseaudio mute"
+
+exec_always --no-startup-id "systemctl --user start polybar@main"
+
+
+# Start i3bar to display a workspace bar (plus the system information i3status
+# finds out, if available)
+#bar {
+#        status_command ~/.i3/conky.sh
+#        position top
+#        tray_output primary
+#        mode dock
+#        font pango:Andale Mono 8
+#        colors {
+#            background #191919
+#            statusline #D4D4D4
+#            separator  #191919
+#            focused_workspace  #4c94af #191919 #4c94af
+#            active_workspace   #222222 #191919 #4c94af
+#            inactive_workspace #222222 #191919 #4c94af
+#            urgent_workspace   #DD1111 #191919 #4c94af
+#        }
+#}
diff --git a/neofetch/config.conf b/neofetch/config.conf
new file mode 100644
index 0000000..33fd6e7
--- /dev/null
+++ b/neofetch/config.conf
@@ -0,0 +1,946 @@
+# See this wiki page for more info:
+# https://github.com/dylanaraps/neofetch/wiki/Customizing-Info
+print_info() {
+    info title
+    info underline
+
+    info "OS" distro
+    info "Host" model
+    info "Kernel" kernel
+    info "Uptime" uptime
+    info "Packages" packages
+    info "Shell" shell
+    info "Editor" editor
+    info "Resolution" resolution
+    info "DE" de
+    info "WM" wm
+    info "WM Theme" wm_theme
+    info "Theme" theme
+    info "Icons" icons
+    info "Cursor" cursor
+    info "Terminal" term
+    info "Terminal Font" term_font
+    info "CPU" cpu
+    info "GPU" gpu
+    info "Memory" memory
+    info "Network" network
+    info "Bluetooth" bluetooth
+    info "BIOS" bios
+
+    # info "GPU Driver" gpu_driver  # Linux/macOS only
+    # info "Disk" disk
+    # info "Battery" battery
+    # info "Power Adapter" power_adapter # macOS only
+    # info "Font" font
+    # info "Song" song
+    # [[ "$player" ]] && prin "Music Player" "$player"
+    # info "Local IP" local_ip
+    # info "Public IP" public_ip
+    # info "Users" users
+    # info "Locale" locale  # This only works on glibc systems.
+
+    # info "Java" java_ver
+    # info "Python" python_ver
+    # info "Node" node_ver
+
+    info cols
+}
+
+# Title
+
+
+# Hide/Show Fully qualified domain name.
+#
+# Default:  'off'
+# Values:   'on', 'off'
+# Flag:     --title_fqdn
+title_fqdn="off"
+
+
+# Kernel
+
+
+# Shorten the output of the kernel function.
+#
+# Default:  'on'
+# Values:   'on', 'off'
+# Flag:     --kernel_shorthand
+# Supports: Everything except *BSDs (except PacBSD and PC-BSD)
+#
+# Example:
+# on:  '4.8.9-1-ARCH'
+# off: 'Linux 4.8.9-1-ARCH'
+kernel_shorthand="on"
+
+
+# Distro
+
+
+# Shorten the output of the distro function
+#
+# Default:  'off'
+# Values:   'on', 'tiny', 'off'
+# Flag:     --distro_shorthand
+# Supports: Everything except Windows and Haiku
+distro_shorthand="off"
+
+# Show/Hide OS Architecture.
+# Show 'x86_64', 'x86' and etc in 'Distro:' output.
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --os_arch
+#
+# Example:
+# on:  'Arch Linux x86_64'
+# off: 'Arch Linux'
+os_arch="on"
+
+
+# Uptime
+
+
+# Shorten the output of the uptime function
+#
+# Default: 'on'
+# Values:  'on', 'tiny', 'off'
+# Flag:    --uptime_shorthand
+#
+# Example:
+# on:   '2 days, 10 hours, 3 mins'
+# tiny: '2d 10h 3m'
+# off:  '2 days, 10 hours, 3 minutes'
+uptime_shorthand="on"
+
+
+# Memory
+
+
+# Show memory percentage in output.
+#
+# Default: 'off'
+# Values:  'on', 'off'
+# Flag:    --memory_percent
+#
+# Example:
+# on:   '1801MiB / 7881MiB (22%)'
+# off:  '1801MiB / 7881MiB'
+memory_percent="on"
+
+# Change memory output unit.
+#
+# Default: 'mib'
+# Values:  'kib', 'mib', 'gib', 'tib'
+# Flag:    --memory_unit
+#
+# Example:
+# kib  '1020928KiB / 7117824KiB'
+# mib  '1042MiB / 6951MiB'
+# gib: ' 0.98GiB / 6.79GiB'
+memory_unit="gib"
+
+# Change memory output precision.
+#
+# Default: '2'
+# Values: integer ≥ 0
+# Flag:    --memory_precision
+mem_precision=2
+
+# Packages
+
+
+# Show/Hide Package Manager names.
+#
+# Default: 'tiny'
+# Values:  'on', 'tiny' 'off'
+# Flag:    --package_managers
+#
+# Example:
+# on:   '998 (pacman), 8 (flatpak), 4 (snap)'
+# tiny: '908 (pacman, flatpak, snap)'
+# off:  '908'
+package_managers="on"
+
+
+# Show separate user and system packages for supported package managers
+# 
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --package_separate
+#
+# Example:
+# on:  '8 packages (flatpak-system), 9 packages (flatpak-user)'
+# off: '17 packages (flatpak)'
+package_separate="on"
+
+
+# Shell
+
+
+# Show the path to $SHELL
+#
+# Default: 'off'
+# Values:  'on', 'off'
+# Flag:    --shell_path
+#
+# Example:
+# on:  '/bin/bash'
+# off: 'bash'
+shell_path="off"
+
+# Show $SHELL version
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --shell_version
+#
+# Example:
+# on:  'bash 4.4.5'
+# off: 'bash'
+shell_version="on"
+
+
+# Editor
+
+
+# Show path to $EDITOR
+#
+# Default: 'off'
+# Values:  'on', 'off'
+# Flag:    --editor_path
+#
+# Example:
+# on:  '/opt/bin/vim'
+# off: 'vim'
+editor_path="off"
+
+# Show $EDITOR version
+#
+# Default:  'on'
+# Values:   'on', 'off'
+# Flag:     '--editor_version'
+#
+# Example:
+# on:  'vim 9.0'
+# off: 'vim'
+editor_version="on"
+
+
+# CPU
+
+
+# CPU speed type
+#
+# Default: 'bios_limit'
+# Values: 'scaling_cur_freq', 'scaling_min_freq', 'scaling_max_freq', 'bios_limit'.
+# Flag:    --speed_type
+# Supports: Linux with 'cpufreq'
+# NOTE: Any file in '/sys/devices/system/cpu/cpu0/cpufreq' can be used as a value.
+speed_type="bios_limit"
+
+# CPU speed shorthand
+#
+# Default: 'off'
+# Values: 'on', 'off'.
+# Flag:    --speed_shorthand
+# NOTE: This flag is not supported in systems with CPU speed less than 1 GHz
+#
+# Example:
+# on:    'i7-6500U (4) @ 3.1GHz'
+# off:   'i7-6500U (4) @ 3.100GHz'
+speed_shorthand="on"
+
+# Enable/Disable CPU brand in output.
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --cpu_brand
+#
+# Example:
+# on:   'Intel i7-6500U'
+# off:  'i7-6500U (4)'
+cpu_brand="on"
+
+# CPU Speed
+# Hide/Show CPU speed.
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --cpu_speed
+#
+# Example:
+# on:  'Intel i7-6500U (4) @ 3.1GHz'
+# off: 'Intel i7-6500U (4)'
+cpu_speed="on"
+
+# CPU Cores
+# Display CPU cores in output
+#
+# Default: 'logical'
+# Values:  'logical', 'physical', 'off'
+# Flag:    --cpu_cores
+# Support: 'physical' doesn't work on BSD.
+#
+# Example:
+# logical:  'Intel i7-6500U (4) @ 3.1GHz' (All virtual cores)
+# physical: 'Intel i7-6500U (2) @ 3.1GHz' (All physical cores)
+# off:      'Intel i7-6500U @ 3.1GHz'
+cpu_cores="logical"
+
+# CPU Temperature
+# Hide/Show CPU temperature.
+# Note the temperature is added to the regular CPU function.
+#
+# Default: 'off'
+# Values:  'C', 'F', 'off'
+# Flag:    --cpu_temp
+# Supports: Linux, BSD
+# NOTE: For FreeBSD and NetBSD-based systems, you'll need to enable
+#       coretemp kernel module. This only supports newer Intel processors.
+#
+# Example:
+# C:   'Intel i7-6500U (4) @ 3.1GHz [27.2°C]'
+# F:   'Intel i7-6500U (4) @ 3.1GHz [82.0°F]'
+# off: 'Intel i7-6500U (4) @ 3.1GHz'
+cpu_temp="off"
+
+
+# GPU
+
+
+# Enable/Disable GPU Brand
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --gpu_brand
+#
+# Example:
+# on:  'AMD HD 7950'
+# off: 'HD 7950'
+gpu_brand="on"
+
+# Which GPU to display
+#
+# Default: 'all'
+# Values:  'all', 'dedicated', 'integrated'
+# Flag:    --gpu_type
+# Supports: Linux
+#
+# Example:
+# all:
+#   GPU1: AMD HD 7950
+#   GPU2: Intel Integrated Graphics
+#
+# dedicated:
+#   GPU1: AMD HD 7950
+#
+# integrated:
+#   GPU1: Intel Integrated Graphics
+gpu_type="all"
+
+
+# Resolution
+
+
+# Display refresh rate next to each monitor
+# Default: 'off'
+# Values:  'on', 'off'
+# Flag:    --refresh_rate
+# Supports: Doesn't work on Windows.
+#
+# Example:
+# on:  '1920x1080 @ 60Hz'
+# off: '1920x1080'
+refresh_rate="on"
+
+
+# Gtk Theme / Icons / Font
+
+
+# Shorten output of GTK Theme / Icons / Font
+#
+# Default: 'off'
+# Values:  'on', 'off'
+# Flag:    --gtk_shorthand
+#
+# Example:
+# on:  'Numix, Adwaita'
+# off: 'Numix [GTK2], Adwaita [GTK3]'
+gtk_shorthand="off"
+
+
+# Enable/Disable gtk2 Theme / Icons / Font
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --gtk2
+#
+# Example:
+# on:  'Numix [GTK2], Adwaita [GTK3]'
+# off: 'Adwaita [GTK3]'
+gtk2="on"
+
+# Enable/Disable gtk3 Theme / Icons / Font
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --gtk3
+#
+# Example:
+# on:  'Numix [GTK2], Adwaita [GTK3]'
+# off: 'Numix [GTK2]'
+gtk3="on"
+
+# Enable/Disable Qt Theme / Icons / Font
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --qt
+#
+# Example:
+# on:  'Breeze [Qt], Arc [GTK3]'
+# off: 'Arc [GTK3]'
+qt="on"
+
+# IP Address
+
+
+# Website to ping for the public IP
+#
+# Default: 'http://ident.me'
+# Values:  'url'
+# Flag:    --ip_host
+public_ip_host="http://ident.me"
+
+# Public IP timeout.
+#
+# Default: '2'
+# Values:  'int'
+# Flag:    --ip_timeout
+public_ip_timeout=2
+
+# Local IP interface
+#
+# Default: 'auto' (interface of default route)
+# Values:  'auto', 'en0', 'en1'
+# Flag:    --ip_interface
+local_ip_interface=('auto')
+
+
+# Desktop Environment
+
+
+# Show Desktop Environment version
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --de_version
+de_version="on"
+
+
+# Disk
+
+
+# Which disks to display.
+# The values can be any /dev/sdXX, mount point or directory.
+# NOTE: By default we only show the disk info for '/'.
+#
+# Default: '/'
+# Values:  '/', '/dev/sdXX', '/path/to/drive'.
+# Flag:    --disk_show
+#
+# Example:
+# disk_show=('/' '/dev/sdb1'):
+#      'Disk (/): 74G / 118G (66%)'
+#      'Disk (/mnt/Videos): 823G / 893G (93%)'
+#
+# disk_show=('/'):
+#      'Disk (/): 74G / 118G (66%)'
+#
+disk_show=('/')
+
+# Disk subtitle.
+# What to append to the Disk subtitle.
+#
+# Default: 'mount'
+# Values:  'mount', 'name', 'dir', 'none'
+# Flag:    --disk_subtitle
+#
+# Example:
+# name:   'Disk (/dev/sda1): 74G / 118G (66%)'
+#         'Disk (/dev/sdb2): 74G / 118G (66%)'
+#
+# mount:  'Disk (/): 74G / 118G (66%)'
+#         'Disk (/mnt/Local Disk): 74G / 118G (66%)'
+#         'Disk (/mnt/Videos): 74G / 118G (66%)'
+#
+# dir:    'Disk (/): 74G / 118G (66%)'
+#         'Disk (Local Disk): 74G / 118G (66%)'
+#         'Disk (Videos): 74G / 118G (66%)'
+#
+# none:   'Disk: 74G / 118G (66%)'
+#         'Disk: 74G / 118G (66%)'
+#         'Disk: 74G / 118G (66%)'
+disk_subtitle="mount"
+
+# Disk percent.
+# Show/Hide disk percent.
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --disk_percent
+#
+# Example:
+# on:  'Disk (/): 74G / 118G (66%)'
+# off: 'Disk (/): 74G / 118G'
+disk_percent="on"
+
+
+# Song
+
+
+# Manually specify a music player.
+#
+# Default: 'auto'
+# Values:  'auto', 'player-name'
+# Flag:    --music_player
+#
+# Available values for 'player-name':
+#
+# amarok
+# audacious
+# banshee
+# bluemindo
+# clementine
+# cmus
+# deadbeef
+# deepin-music
+# dragon
+# elisa
+# exaile
+# gnome-music
+# gmusicbrowser
+# gogglesmm
+# guayadeque
+# io.elementary.music
+# iTunes
+# Music
+# juk
+# lollypop
+# MellowPlayer
+# mocp
+# mopidy
+# mpd
+# muine
+# netease-cloud-music
+# olivia
+# playerctl
+# pogo
+# pragha
+# qmmp
+# quodlibet
+# rhythmbox
+# sayonara
+# smplayer
+# spotify
+# strawberry
+# tauonmb
+# tomahawk
+# vlc
+# xmms2d
+# xnoise
+# yarock
+music_player="auto"
+
+# Format to display song information.
+#
+# Default: '%artist% - %album% - %title%'
+# Values:  '%artist%', '%album%', '%title%'
+# Flag:    --song_format
+#
+# Example:
+# default: 'Song: Jet - Get Born - Sgt Major'
+song_format="%artist% - %album% - %title%"
+
+# Print the Artist, Album and Title on separate lines
+#
+# Default: 'off'
+# Values:  'on', 'off'
+# Flag:    --song_shorthand
+#
+# Example:
+# on:  'Artist: The Fratellis'
+#      'Album: Costello Music'
+#      'Song: Chelsea Dagger'
+#
+# off: 'Song: The Fratellis - Costello Music - Chelsea Dagger'
+song_shorthand="off"
+
+# 'mpc' arguments (specify a host, password etc).
+#
+# Default:  ''
+# Example: mpc_args=(-h HOST -P PASSWORD)
+mpc_args=()
+
+
+# Text Colors
+
+
+# Text Colors
+#
+# Default:  'distro'
+# Values:   'distro', 'num' 'num' 'num' 'num' 'num' 'num'
+# Flag:     --colors
+#
+# Each number represents a different part of the text in
+# this order: 'title', '@', 'underline', 'subtitle', 'colon', 'info'
+#
+# Example:
+# colors=(distro)      - Text is colored based on Distro colors.
+# colors=(4 6 1 8 8 6) - Text is colored in the order above.
+colors=(distro)
+
+
+# Text Options
+
+
+# Toggle bold text
+#
+# Default:  'on'
+# Values:   'on', 'off'
+# Flag:     --bold
+bold="on"
+
+# Enable/Disable Underline
+#
+# Default:  'on'
+# Values:   'on', 'off'
+# Flag:     --underline
+underline_enabled="on"
+
+# Underline character
+#
+# Default:  '-'
+# Values:   'string'
+# Flag:     --underline_char
+underline_char="-"
+
+
+# Info Separator
+# Replace the default separator with the specified string.
+#
+# Default:  ':'
+# Flag:     --separator
+#
+# Example:
+# separator="->":   'Shell-> bash'
+# separator=" =":   'WM = dwm'
+separator=":"
+
+
+# Color Blocks
+
+
+# Color block range
+# The range of colors to print.
+#
+# Default:  '0', '15'
+# Values:   'num'
+# Flag:     --block_range
+#
+# Example:
+#
+# Display colors 0-7 in the blocks.  (8 colors)
+# neofetch --block_range 0 7
+#
+# Display colors 0-15 in the blocks. (16 colors)
+# neofetch --block_range 0 15
+block_range=(0 15)
+
+# Toggle color blocks
+#
+# Default:  'on'
+# Values:   'on', 'off'
+# Flag:     --color_blocks
+color_blocks="on"
+
+# Color block width in spaces
+#
+# Default:  '3'
+# Values:   'num'
+# Flag:     --block_width
+block_width=3
+
+# Color block height in lines
+#
+# Default:  '1'
+# Values:   'num'
+# Flag:     --block_height
+block_height=1
+
+# Color Alignment
+#
+# Default: 'auto'
+# Values: 'auto', 'num'
+# Flag: --col_offset
+#
+# Number specifies how far from the left side of the terminal (in spaces) to
+# begin printing the columns, in case you want to e.g. center them under your
+# text.
+# Example:
+# col_offset="auto" - Default behavior of neofetch
+# col_offset=7      - Leave 7 spaces then print the colors
+col_offset="auto"
+
+# Progress Bars
+
+
+# Bar characters
+#
+# Default:  '-', '='
+# Values:   'string', 'string'
+# Flag:     --bar_char
+#
+# Example:
+# neofetch --bar_char 'elapsed' 'total'
+# neofetch --bar_char '-' '='
+bar_char_elapsed="-"
+bar_char_total="="
+
+# Toggle Bar border
+#
+# Default:  'on'
+# Values:   'on', 'off'
+# Flag:     --bar_border
+bar_border="on"
+
+# Progress bar length in spaces
+# Number of chars long to make the progress bars.
+#
+# Default:  '15'
+# Values:   'num'
+# Flag:     --bar_length
+bar_length=15
+
+# Progress bar colors
+# When set to distro, uses your distro's logo colors.
+#
+# Default:  'distro', 'distro'
+# Values:   'distro', 'num'
+# Flag:     --bar_colors
+#
+# Example:
+# neofetch --bar_colors 3 4
+# neofetch --bar_colors distro 5
+bar_color_elapsed="distro"
+bar_color_total="distro"
+
+
+# Info display
+# Display a bar with the info.
+#
+# Default: 'off'
+# Values:  'bar', 'infobar', 'barinfo', 'off'
+# Flags:   --memory_display
+#          --battery_display
+#          --disk_display
+#
+# Example:
+# bar:     '[---=======]'
+# infobar: 'info [---=======]'
+# barinfo: '[---=======] info'
+# off:     'info'
+memory_display="off"
+battery_display="off"
+disk_display="off"
+
+
+# Backend Settings
+
+
+# Image backend.
+#
+# Default:  'ascii'
+# Values:   'ascii', 'caca', 'catimg', 'chafa', 'jp2a', 'iterm2', 'off',
+#           'pot', 'termpix', 'pixterm', 'tycat', 'w3m', 'kitty', 'ueberzug',
+#           'viu'
+
+# Flag:     --backend
+image_backend="ascii"
+
+# Image Source
+#
+# Which image or ascii file to display.
+#
+# Default:  'auto'
+# Values:   'auto', 'ascii', 'wallpaper', '/path/to/img', '/path/to/ascii', '/path/to/dir/'
+#           'command output (neofetch --ascii "$(fortune | cowsay -W 30)")'
+# Flag:     --source
+#
+# NOTE: 'auto' will pick the best image source for whatever image backend is used.
+#       In ascii mode, distro ascii art will be used and in an image mode, your
+#       wallpaper will be used.
+image_source="auto"
+
+
+# Ascii Options
+
+
+# Ascii distro
+# Which distro's ascii art to display.
+#
+# Default: 'auto'
+# Values:  'auto', 'distro_name'
+# Flag:    --ascii_distro
+#
+# NOTE: Adélie, aerOS, Afterglow, AIX, AlmaLinux, Alpine, Alter, Amazon, AmogOS, Anarchy, Android,
+# Antergos, antiX, AOSC OS, Aperio GNU/Linux, Aperture, Apricity, Arch, ArchBox, Archcraft,
+# archcraft_ascii, archcraft_minimal, ARCHlabs, ArchMerge, ArchStrike, ArcoLinux, ArseLinux, Artix,
+# Arya, Asahi, AsteroidOS, astOS, Astra Linux, Athena, azos, Bedrock, BigLinux, Bitrig, BlackArch,
+# blackPanther, BLAG, BlankOn, BlueLight, Bodhi, bonsai, BSD, BunsenLabs, CachyOS, Calculate,
+# CalinixOS, Carbs, CBL-Mariner, CelOS, Center, CentOS, Chakra, ChaletOS, Chapeau, ChonkySealOS,
+# Chrom, Cleanjaro, Clear Linux OS, ClearOS, Clover, Cobalt, Condres, Container Linux by CoreOS,
+# CRUX, Crystal Linux, Cucumber, CutefishOS, CuteOS, CyberOS, dahlia, DarkOs, Darwin, Debian,
+# Deepin, DesaOS, Devuan, DietPi, digital UNIX, DracOS, DragonFly, Drauger, Droidian, Elementary,
+# Elive, EncryptOS, EndeavourOS, Endless, Enso, EuroLinux, EvolutionOS, Exherbo, Exodia Predator OS,
+# Fedora, FemboyOS, Feren, Finnix, Floflis, FreeBSD, FreeMiNT, Frugalware, Funtoo, GalliumOS,
+# Garuda, Gentoo, GhostBSD, glaucus, gNewSense, GNOME, GNU, GoboLinux, GrapheneOS, Grombyang, Guix,
+# Haiku, HamoniKR, HarDClanZ, Hash, Huayra, Hybrid, HydroOS, Hyperbola, iglunix, instantOS, Interix,
+# IRIX, Itc, januslinux, Kaisen, Kali, KaOS, KDE, Kibojoe, Kogaion, Korora, KrassOS, KSLinux,
+# Kubuntu, LainOS, LangitKetujuh, LaxerOS, LEDE, LibreELEC, Linspire, Linux, Linux Lite, Linux Mint,
+# Linux Mint Old, Live Raizo, LMDE, Lubuntu, Lunar, mac, Mageia, MagpieOS, MainsailOS, Mandriva,
+# Manjaro, MassOS, MatuusOS, Maui, Meowix, Mer, Minix, MIRACLE LINUX, MX, Namib, NekOS, Neptune,
+# NetBSD, Netrunner, Nitrux, NixOS, Nobara, NomadBSD, Nurunner, NuTyX, Obarun, OBRevenge, OmniOS,
+# Open Source Media Center, OpenBSD, openEuler, OpenIndiana, openKylin, openmamba, OpenMandriva,
+# OpenStage, openSUSE, openSUSE Leap, openSUSE Tumbleweed, OPNsense, Oracle, orchid, OS Elbrus,
+# PacBSD, Panwah, Parabola, parch, Pardus, Parrot, Parsix, PCBSD, PCLinuxOS, pearOS, Pengwin,
+# Pentoo, Peppermint, Peropesis, phyOS, PikaOS, Pisi, PNM Linux, Pop!_OS, Porteus, PostMarketOS,
+# Profelis SambaBOX, Proxmox, PuffOS, Puppy, PureOS, Q4OS, Qubes, Qubyt, Quibian, Radix, Raspbian,
+# ravynOS, Reborn OS, Red Star, Redcore, Redhat, Refracted Devuan, Regata, Regolith, RhaymOS, rocky,
+# Rosa, Sabayon, sabotage, Sailfish, SalentOS, Salient OS, Salix, Sasanqua, Scientific, semc,
+# Septor, Serene, SharkLinux, ShastraOS, Siduction, SkiffOS, Slackel, Slackware, SliTaz, SmartOS,
+# Soda, Solus, Source Mage, Sparky, Star, SteamOS, Stock Linux, Sulin, SunOS, SwagArch, t2, Tails,
+# TeArch, TorizonCore, Trisquel, Twister, Ubuntu, Ubuntu Budgie, Ubuntu Cinnamon, Ubuntu Kylin,
+# Ubuntu MATE, Ubuntu Studio, Ubuntu Sway, Ubuntu Touch, Ubuntu-GNOME, ubuntu_old02, Ultramarine
+# Linux, unicodearch, Univalent, Univention, Uos, UrukOS, uwuntu, Vanilla, Venom, VNux, Void,
+# VzLinux, wii-linux-ngx, Windows, Windows 10, Windows 11, Windows95, Wrt, Xenia, Xenia2, XFerience,
+# Xray_OS, Xubuntu, yiffOS, Zorin have ascii logos.
+
+# NOTE: arch, dragonfly, Fedora, LangitKetujuh, nixos, redhat, Ubuntu have 'old' logo variants, use
+# {distro}_old to use them.
+
+# NOTE: alpine, android, arch, arcolinux, artix, CalinixOS, centos, cleanjaro, crux, debian,
+# dragonfly, elementary, endeavouros, fedora, freebsd, garuda, gentoo, guix, haiku, hyperbola, kali,
+# Linux, linuxlite, linuxmint, mac, mageia, MainsailOS, manjaro, mx, netbsd, nixos, openbsd,
+# opensuse, orchid, parabola, popos, postmarketos, pureos, Raspbian, rocky, slackware, sunos,
+# ubuntu, venom, void have 'small' logo variants, use {distro}_small to use them.
+ascii_distro="auto"
+
+# Ascii Colors
+#
+# Default:  'distro'
+# Values:   'distro', 'num' 'num' 'num' 'num' 'num' 'num'
+# Flag:     --ascii_colors
+#
+# Example:
+# ascii_colors=(distro)      - Ascii is colored based on Distro colors.
+# ascii_colors=(4 6 1 8 8 6) - Ascii is colored using these colors.
+ascii_colors=(distro)
+
+# Bold ascii logo
+# Whether or not to bold the ascii logo.
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --ascii_bold
+ascii_bold="on"
+
+
+# Image Options
+
+
+# Image loop
+# Setting this to on will make neofetch redraw the image constantly until
+# Ctrl+C is pressed. This fixes display issues in some terminal emulators.
+#
+# Default:  'off'
+# Values:   'on', 'off'
+# Flag:     --loop
+image_loop="off"
+
+# Thumbnail directory
+#
+# Default: '~/.cache/thumbnails/neofetch'
+# Values:  'dir'
+thumbnail_dir="${XDG_CACHE_HOME:-${HOME}/.cache}/thumbnails/neofetch"
+
+# Crop mode
+#
+# Default:  'normal'
+# Values:   'normal', 'fit', 'fill'
+# Flag:     --crop_mode
+#
+# See this wiki page to learn about the fit and fill options.
+# https://github.com/dylanaraps/neofetch/wiki/What-is-Waifu-Crop%3F
+crop_mode="normal"
+
+# Crop offset
+# Note: Only affects 'normal' crop mode.
+#
+# Default:  'center'
+# Values:   'northwest', 'north', 'northeast', 'west', 'center'
+#           'east', 'southwest', 'south', 'southeast'
+# Flag:     --crop_offset
+crop_offset="center"
+
+# Image size
+# The image is half the terminal width by default.
+#
+# Default: 'auto'
+# Values:  'auto', '00px', '00%', 'none'
+# Flags:   --image_size
+#          --size
+image_size="auto"
+
+# Catimg block size.
+# Control the resolution of catimg.
+#
+# Default: '2'
+# Values:  '1', '2'
+# Flags:   --catimg_size
+catimg_size="2"
+
+# Gap between image and text
+#
+# Default: '3'
+# Values:  'num', '-num'
+# Flag:    --gap
+gap=3
+
+# Image offsets
+# Only works with the w3m backend.
+#
+# Default: '0'
+# Values:  'px'
+# Flags:   --xoffset
+#          --yoffset
+yoffset=0
+xoffset=0
+
+# Image background color
+# Only works with the w3m backend.
+#
+# Default: ''
+# Values:  'color', 'blue'
+# Flag:    --bg_color
+background_color=
+
+
+# Misc Options
+
+# Stdout mode
+# If enabled, turn off all colors and disables image backend (ASCII/Image).
+# Useful for piping into another command.
+# Default: 'auto'
+# Values: 'auto', 'on', 'off'
+stdout="auto"
diff --git a/paru/paru.conf b/paru/paru.conf
new file mode 100644
index 0000000..374b735
--- /dev/null
+++ b/paru/paru.conf
@@ -0,0 +1,39 @@
+#
+# $PARU_CONF
+# /etc/paru.conf
+# ~/.config/paru/paru.conf
+#
+# See the paru.conf(5) manpage for options
+
+#
+# GENERAL OPTIONS
+#
+[options]
+PgpFetch
+Devel
+Provides
+DevelSuffixes = -git -cvs -svn -bzr -darcs -always -hg
+#AurOnly
+BottomUp
+#RemoveMake
+#SudoLoop
+#UseAsk
+#SaveChanges
+#CombinedUpgrade
+#CleanAfter
+#UpgradeMenu
+#NewsOnUpgrade
+
+#LocalRepo
+#Chroot
+#Sign
+#SignDb
+#KeepRepoCache
+
+#
+# Binary OPTIONS
+#
+#[bin]
+#FileManager = vifm
+#MFlags = --skippgpcheck
+#Sudo = doas
diff --git a/picom/picom.conf b/picom/picom.conf
new file mode 100644
index 0000000..7d8572b
--- /dev/null
+++ b/picom/picom.conf
@@ -0,0 +1,424 @@
+#################################
+#             Shadows           #
+#################################
+
+
+# Enabled client-side shadows on windows. Note desktop windows
+# (windows with '_NET_WM_WINDOW_TYPE_DESKTOP') never get shadow,
+# unless explicitly requested using the wintypes option.
+#
+shadow = false
+#shadow = true;
+
+# The blur radius for shadows, in pixels. (defaults to 12)
+# shadow-radius = 12
+shadow-radius = 7;
+
+# The opacity of shadows. (0.0 - 1.0, defaults to 0.75)
+# shadow-opacity = .75
+
+# The left offset for shadows, in pixels. (defaults to -15)
+# shadow-offset-x = -15
+shadow-offset-x = -7;
+
+# The top offset for shadows, in pixels. (defaults to -15)
+# shadow-offset-y = -15
+shadow-offset-y = -7;
+
+# Avoid drawing shadows on dock/panel windows. This option is deprecated,
+# you should use the *wintypes* option in your config file instead.
+#
+# no-dock-shadow = false
+
+# Don't draw shadows on drag-and-drop windows. This option is deprecated,
+# you should use the *wintypes* option in your config file instead.
+#
+# no-dnd-shadow = false
+
+# Red color value of shadow (0.0 - 1.0, defaults to 0).
+# shadow-red = 0
+
+# Green color value of shadow (0.0 - 1.0, defaults to 0).
+# shadow-green = 0
+
+# Blue color value of shadow (0.0 - 1.0, defaults to 0).
+# shadow-blue = 0
+
+# Do not paint shadows on shaped windows. Note shaped windows
+# here means windows setting its shape through X Shape extension.
+# Those using ARGB background is beyond our control.
+# Deprecated, use
+#   shadow-exclude = 'bounding_shaped'
+# or
+#   shadow-exclude = 'bounding_shaped && !rounded_corners'
+# instead.
+#
+# shadow-ignore-shaped = ''
+
+# Specify a list of conditions of windows that should have no shadow.
+#
+# examples:
+#   shadow-exclude = "n:e:Notification";
+#
+# shadow-exclude = []
+shadow-exclude = [
+  "name = 'Notification'",
+  "class_g = 'Conky'",
+  "class_g = 'firefox' && argb",
+  "class_g ?= 'Notify-osd'",
+  "class_g = 'Cairo-clock'",
+  "_GTK_FRAME_EXTENTS@:c"
+];
+
+# Specify a X geometry that describes the region in which shadow should not
+# be painted in, such as a dock window region. Use
+#    shadow-exclude-reg = "x10+0+0"
+# for example, if the 10 pixels on the bottom of the screen should not have shadows painted on.
+#
+# shadow-exclude-reg = ""
+
+# Crop shadow of a window fully on a particular Xinerama screen to the screen.
+# xinerama-shadow-crop = false
+
+
+#################################
+#           Fading              #
+#################################
+
+
+# Fade windows in/out when opening/closing and when opacity changes,
+#  unless no-fading-openclose is used.
+fading = false
+# fading = true
+
+# Opacity change between steps while fading in. (0.01 - 1.0, defaults to 0.028)
+# fade-in-step = 0.028
+fade-in-step = 0.03;
+
+# Opacity change between steps while fading out. (0.01 - 1.0, defaults to 0.03)
+# fade-out-step = 0.03
+fade-out-step = 0.03;
+
+# The time between steps in fade step, in milliseconds. (> 0, defaults to 10)
+# fade-delta = 10
+
+# Specify a list of conditions of windows that should not be faded.
+# fade-exclude = []
+
+# Do not fade on window open/close.
+# no-fading-openclose = false
+
+# Do not fade destroyed ARGB windows with WM frame. Workaround of bugs in Openbox, Fluxbox, etc.
+# no-fading-destroyed-argb = false
+
+
+#################################
+#   Transparency / Opacity      #
+#################################
+
+
+# Opacity of inactive windows. (0.1 - 1.0, defaults to 1.0)
+# inactive-opacity = 1
+inactive-opacity = 1;
+
+# Opacity of window titlebars and borders. (0.1 - 1.0, disabled by default)
+# frame-opacity = 1.0
+frame-opacity = 0.7;
+
+# Default opacity for dropdown menus and popup menus. (0.0 - 1.0, defaults to 1.0)
+# menu-opacity = 1.0
+
+# Let inactive opacity set by -i override the '_NET_WM_OPACITY' values of windows.
+# inactive-opacity-override = true
+inactive-opacity-override = false;
+
+# Default opacity for active windows. (0.0 - 1.0, defaults to 1.0)
+# active-opacity = 1.0
+
+# Dim inactive windows. (0.0 - 1.0, defaults to 0.0)
+# inactive-dim = 0.0
+
+# Specify a list of conditions of windows that should always be considered focused.
+# focus-exclude = []
+focus-exclude = [ "class_g = 'Cairo-clock'" ];
+
+# Use fixed inactive dim value, instead of adjusting according to window opacity.
+# inactive-dim-fixed = 1.0
+
+# Specify a list of opacity rules, in the format `PERCENT:PATTERN`,
+# like `50:name *= "Firefox"`. picom-trans is recommended over this.
+# Note we don't make any guarantee about possible conflicts with other
+# programs that set '_NET_WM_WINDOW_OPACITY' on frame or client windows.
+# example:
+#    opacity-rule = [ "80:class_g = 'URxvt'" ];
+#
+# opacity-rule = []
+
+
+#################################
+#     Background-Blurring       #
+#################################
+
+
+# Parameters for background blurring, see the *BLUR* section for more information.
+# blur-method =
+# blur-size = 12
+#
+# blur-deviation = false
+
+# Blur background of semi-transparent / ARGB windows.
+# Bad in performance, with driver-dependent behavior.
+# The name of the switch may change without prior notifications.
+#
+# blur-background = false
+
+# Blur background of windows when the window frame is not opaque.
+# Implies:
+#    blur-background
+# Bad in performance, with driver-dependent behavior. The name may change.
+#
+# blur-background-frame = false
+
+
+# Use fixed blur strength rather than adjusting according to window opacity.
+# blur-background-fixed = false
+
+
+# Specify the blur convolution kernel, with the following format:
+# example:
+#   blur-kern = "5,5,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1";
+#
+# blur-kern = ''
+blur-kern = "3x3box";
+
+
+# Exclude conditions for background blur.
+# blur-background-exclude = []
+blur-background-exclude = [
+  "window_type = 'dock'",
+  "window_type = 'desktop'",
+  "_GTK_FRAME_EXTENTS@:c"
+];
+
+#################################
+#       General Settings        #
+#################################
+
+# Daemonize process. Fork to background after initialization. Causes issues with certain (badly-written) drivers.
+# daemon = false
+
+# Specify the backend to use: `xrender`, `glx`, or `xr_glx_hybrid`.
+# `xrender` is the default one.
+#
+# backend = 'glx'
+backend = "xrender";
+
+# Enable/disable VSync.
+vsync = false
+# vsync = true
+
+# Enable remote control via D-Bus. See the *D-BUS API* section below for more details.
+# dbus = false
+
+# Try to detect WM windows (a non-override-redirect window with no
+# child that has 'WM_STATE') and mark them as active.
+#
+# mark-wmwin-focused = false
+mark-wmwin-focused = true;
+
+# Mark override-redirect windows that doesn't have a child window with 'WM_STATE' focused.
+# mark-ovredir-focused = false
+mark-ovredir-focused = true;
+
+# Try to detect windows with rounded corners and don't consider them
+# shaped windows. The accuracy is not very high, unfortunately.
+#
+# detect-rounded-corners = false
+detect-rounded-corners = true;
+
+# Detect '_NET_WM_OPACITY' on client windows, useful for window managers
+# not passing '_NET_WM_OPACITY' of client windows to frame windows.
+#
+# detect-client-opacity = false
+detect-client-opacity = true;
+
+# Specify refresh rate of the screen. If not specified or 0, picom will
+# try detecting this with X RandR extension.
+#
+# refresh-rate = 60
+refresh-rate = 0
+
+# Limit picom to repaint at most once every 1 / 'refresh_rate' second to
+# boost performance. This should not be used with
+#   vsync drm/opengl/opengl-oml
+# as they essentially does sw-opti's job already,
+# unless you wish to specify a lower refresh rate than the actual value.
+#
+# sw-opti =
+
+# Use EWMH '_NET_ACTIVE_WINDOW' to determine currently focused window,
+# rather than listening to 'FocusIn'/'FocusOut' event. Might have more accuracy,
+# provided that the WM supports it.
+#
+# use-ewmh-active-win = false
+
+# Unredirect all windows if a full-screen opaque window is detected,
+# to maximize performance for full-screen windows. Known to cause flickering
+# when redirecting/unredirecting windows.
+#
+# unredir-if-possible = false
+
+# Delay before unredirecting the window, in milliseconds. Defaults to 0.
+# unredir-if-possible-delay = 0
+
+# Conditions of windows that shouldn't be considered full-screen for unredirecting screen.
+# unredir-if-possible-exclude = []
+
+# Use 'WM_TRANSIENT_FOR' to group windows, and consider windows
+# in the same group focused at the same time.
+#
+# detect-transient = false
+detect-transient = true
+
+# Use 'WM_CLIENT_LEADER' to group windows, and consider windows in the same
+# group focused at the same time. 'WM_TRANSIENT_FOR' has higher priority if
+# detect-transient is enabled, too.
+#
+# detect-client-leader = false
+detect-client-leader = true
+
+# Resize damaged region by a specific number of pixels.
+# A positive value enlarges it while a negative one shrinks it.
+# If the value is positive, those additional pixels will not be actually painted
+# to screen, only used in blur calculation, and such. (Due to technical limitations,
+# with use-damage, those pixels will still be incorrectly painted to screen.)
+# Primarily used to fix the line corruption issues of blur,
+# in which case you should use the blur radius value here
+# (e.g. with a 3x3 kernel, you should use `--resize-damage 1`,
+# with a 5x5 one you use `--resize-damage 2`, and so on).
+# May or may not work with *--glx-no-stencil*. Shrinking doesn't function correctly.
+#
+# resize-damage = 1
+
+# Specify a list of conditions of windows that should be painted with inverted color.
+# Resource-hogging, and is not well tested.
+#
+# invert-color-include = []
+
+# GLX backend: Avoid using stencil buffer, useful if you don't have a stencil buffer.
+# Might cause incorrect opacity when rendering transparent content (but never
+# practically happened) and may not work with blur-background.
+# My tests show a 15% performance boost. Recommended.
+#
+# glx-no-stencil = false
+
+# GLX backend: Avoid rebinding pixmap on window damage.
+# Probably could improve performance on rapid window content changes,
+# but is known to break things on some drivers (LLVMpipe, xf86-video-intel, etc.).
+# Recommended if it works.
+#
+# glx-no-rebind-pixmap = false
+
+# Disable the use of damage information.
+# This cause the whole screen to be redrawn everytime, instead of the part of the screen
+# has actually changed. Potentially degrades the performance, but might fix some artifacts.
+# The opposing option is use-damage
+#
+# no-use-damage = false
+use-damage = true
+
+# Use X Sync fence to sync clients' draw calls, to make sure all draw
+# calls are finished before picom starts drawing. Needed on nvidia-drivers
+# with GLX backend for some users.
+#
+# xrender-sync-fence = false
+
+# GLX backend: Use specified GLSL fragment shader for rendering window contents.
+# See `compton-default-fshader-win.glsl` and `compton-fake-transparency-fshader-win.glsl`
+# in the source tree for examples.
+#
+# glx-fshader-win = ''
+
+# Force all windows to be painted with blending. Useful if you
+# have a glx-fshader-win that could turn opaque pixels transparent.
+#
+# force-win-blend = false
+
+# Do not use EWMH to detect fullscreen windows.
+# Reverts to checking if a window is fullscreen based only on its size and coordinates.
+#
+# no-ewmh-fullscreen = false
+
+# Dimming bright windows so their brightness doesn't exceed this set value.
+# Brightness of a window is estimated by averaging all pixels in the window,
+# so this could comes with a performance hit.
+# Setting this to 1.0 disables this behaviour. Requires --use-damage to be disabled. (default: 1.0)
+#
+# max-brightness = 1.0
+
+# Make transparent windows clip other windows like non-transparent windows do,
+# instead of blending on top of them.
+#
+# transparent-clipping = false
+
+# Set the log level. Possible values are:
+#  "trace", "debug", "info", "warn", "error"
+# in increasing level of importance. Case doesn't matter.
+# If using the "TRACE" log level, it's better to log into a file
+# using *--log-file*, since it can generate a huge stream of logs.
+#
+# log-level = "debug"
+log-level = "warn";
+
+# Set the log file.
+# If *--log-file* is never specified, logs will be written to stderr.
+# Otherwise, logs will to written to the given file, though some of the early
+# logs might still be written to the stderr.
+# When setting this option from the config file, it is recommended to use an absolute path.
+#
+# log-file = '/path/to/your/log/file'
+
+# Show all X errors (for debugging)
+# show-all-xerrors = false
+
+# Write process ID to a file.
+# write-pid-path = '/path/to/your/log/file'
+
+# Window type settings
+#
+# 'WINDOW_TYPE' is one of the 15 window types defined in EWMH standard:
+#     "unknown", "desktop", "dock", "toolbar", "menu", "utility",
+#     "splash", "dialog", "normal", "dropdown_menu", "popup_menu",
+#     "tooltip", "notification", "combo", and "dnd".
+#
+# Following per window-type options are available: ::
+#
+#   fade, shadow:::
+#     Controls window-type-specific shadow and fade settings.
+#
+#   opacity:::
+#     Controls default opacity of the window type.
+#
+#   focus:::
+#     Controls whether the window of this type is to be always considered focused.
+#     (By default, all window types except "normal" and "dialog" has this on.)
+#
+#   full-shadow:::
+#     Controls whether shadow is drawn under the parts of the window that you
+#     normally won't be able to see. Useful when the window has parts of it
+#     transparent, and you want shadows in those areas.
+#
+#   redir-ignore:::
+#     Controls whether this type of windows should cause screen to become
+#     redirected again after been unredirected. If you have unredir-if-possible
+#     set, and doesn't want certain window to cause unnecessary screen redirection,
+#     you can set this to `true`.
+#
+wintypes:
+{
+  tooltip = { fade = true; shadow = true; opacity = 0.75; focus = true; full-shadow = false; };
+  dock = { shadow = false; }
+  dnd = { shadow = false; }
+  popup_menu = { opacity = 0.8; }
+  dropdown_menu = { opacity = 0.8; }
+};
diff --git a/pipewire/midi2volume.sh b/pipewire/midi2volume.sh
new file mode 100755
index 0000000..230e694
--- /dev/null
+++ b/pipewire/midi2volume.sh
@@ -0,0 +1,47 @@
+#! /bin/bash
+
+FF_STREAM=$(wpctl status | grep "Firefox *$" | awk -F. '{ print $1 }')
+MUSIC_STREAM=$(wpctl status | grep "Chromium *$" | awk -F. '{ print $1 }')
+SPEAKER_SINK=$(wpctl status | grep "Family 17h/19h HD Audio Controller Speaker + Headphones \[" | awk -F'[. ]' '{ print $7 }')
+
+function setvol {
+    VOL=$(echo "scale=2;$2/100" | bc -l)
+    wpctl set-volume $1 "$VOL"
+}
+
+aseqdump -p 28 | \
+while IFS=" ," read src ev1 ev2 ch label1 data1 label2 data2; do
+    case "$data1" in
+        # slider music
+        "3")
+            setvol $MUSIC_STREAM $data2
+            ;;
+        # slider firefox
+        "7")
+            setvol $FF_STREAM $data2
+            ;;
+        # Knob speakers
+        "16")
+            setvol $SPEAKER_SINK $data2
+            ;;
+        # Play and Stop buttons
+        "41"|"42")
+            xdotool key XF86AudioPlay
+            ;;
+        # Previous song
+        "43")
+            if [ $data2 -eq 127 ]; then xdotool key XF86AudioPrev; fi
+            ;;
+        # Next song
+        "44")
+            if [ $data2 -eq 127 ]; then xdotool key XF86AudioNext; fi
+            ;;
+        # Restart script
+        "46")
+            if [ $data2 -eq 127 ]; then systemctl --user restart midi.service; fi
+            ;;
+        # Mute music
+        "51")
+            ;;
+    esac
+done
\ No newline at end of file
diff --git a/pipewire/pipewire.conf b/pipewire/pipewire.conf
new file mode 100644
index 0000000..e0a2fbd
--- /dev/null
+++ b/pipewire/pipewire.conf
@@ -0,0 +1,318 @@
+# Daemon config file for PipeWire version "1.0.3" #
+#
+# Copy and edit this file in /etc/pipewire for system-wide changes
+# or in ~/.config/pipewire for local changes.
+#
+# It is also possible to place a file with an updated section in
+# /etc/pipewire/pipewire.conf.d/ for system-wide changes or in
+# ~/.config/pipewire/pipewire.conf.d/ for local changes.
+#
+
+context.properties = {
+    ## Configure properties in the system.
+    #library.name.system                   = support/libspa-support
+    #context.data-loop.library.name.system = support/libspa-support
+    #support.dbus                          = true
+    #link.max-buffers                      = 64
+    link.max-buffers                       = 16                       # version < 3 clients can't handle more
+    #mem.warn-mlock                        = false
+    #mem.allow-mlock                       = true
+    #mem.mlock-all                         = false
+    #clock.power-of-two-quantum            = true
+    #log.level                             = 2
+    #cpu.zero.denormals                    = false
+
+    core.daemon = true              # listening for socket connections
+    core.name   = pipewire-0        # core name and socket name
+
+    ## Properties for the DSP configuration.
+    #default.clock.rate          = 48000
+    #default.clock.allowed-rates = [ 48000 ]
+    #default.clock.quantum       = 1024
+    #default.clock.min-quantum   = 32
+    #default.clock.max-quantum   = 2048
+    #default.clock.quantum-limit = 8192
+    #default.video.width         = 640
+    #default.video.height        = 480
+    #default.video.rate.num      = 25
+    #default.video.rate.denom    = 1
+    #
+    #settings.check-quantum      = false
+    #settings.check-rate         = false
+    #
+    # These overrides are only applied when running in a vm.
+    vm.overrides = {
+        default.clock.min-quantum = 1024
+    }
+
+    # keys checked below to disable module loading
+    module.x11.bell = true
+    # enables autoloading of access module, when disabled an alternative
+    # access module needs to be loaded.
+    module.access = true
+    # enables autoloading of module-jackdbus-detect
+    module.jackdbus-detect = true
+}
+
+context.spa-libs = {
+    #<factory-name regex> = <library-name>
+    #
+    # Used to find spa factory names. It maps an spa factory name
+    # regular expression to a library name that should contain
+    # that factory.
+    #
+    audio.convert.* = audioconvert/libspa-audioconvert
+    avb.*           = avb/libspa-avb
+    api.alsa.*      = alsa/libspa-alsa
+    api.v4l2.*      = v4l2/libspa-v4l2
+    api.libcamera.* = libcamera/libspa-libcamera
+    api.bluez5.*    = bluez5/libspa-bluez5
+    api.vulkan.*    = vulkan/libspa-vulkan
+    api.jack.*      = jack/libspa-jack
+    support.*       = support/libspa-support
+    #videotestsrc   = videotestsrc/libspa-videotestsrc
+    #audiotestsrc   = audiotestsrc/libspa-audiotestsrc
+}
+
+context.modules = [
+    #{ name = <module-name>
+    #    ( args  = { <key> = <value> ... } )
+    #    ( flags = [ ( ifexists ) ( nofail ) ] )
+    #    ( condition = [ { <key> = <value> ... } ... ] )
+    #}
+    #
+    # Loads a module with the given parameters.
+    # If ifexists is given, the module is ignored when it is not found.
+    # If nofail is given, module initialization failures are ignored.
+    # If condition is given, the module is loaded only when the context
+    # properties all match the match rules.
+    #
+
+    # Uses realtime scheduling to boost the audio thread priorities. This uses
+    # RTKit if the user doesn't have permission to use regular realtime
+    # scheduling. You can also clamp utilisation values to improve scheduling
+    # on embedded and heterogeneous systems, e.g. Arm big.LITTLE devices.
+    { name = libpipewire-module-rt
+        args = {
+            nice.level    = -11
+            #rt.prio      = 88
+            #rt.time.soft = -1
+            #rt.time.hard = -1
+            #uclamp.min = 0
+            #uclamp.max = 1024
+        }
+        flags = [ ifexists nofail ]
+    }
+
+    # The native communication protocol.
+    { name = libpipewire-module-protocol-native
+        args = {
+            # List of server Unix sockets, and optionally permissions
+            #sockets = [ { name = "pipewire-0" }, { name = "pipewire-0-manager" } ]
+        }
+    }
+
+    # The profile module. Allows application to access profiler
+    # and performance data. It provides an interface that is used
+    # by pw-top and pw-profiler.
+    { name = libpipewire-module-profiler }
+
+    # Allows applications to create metadata objects. It creates
+    # a factory for Metadata objects.
+    { name = libpipewire-module-metadata }
+
+    # Creates a factory for making devices that run in the
+    # context of the PipeWire server.
+    { name = libpipewire-module-spa-device-factory }
+
+    # Creates a factory for making nodes that run in the
+    # context of the PipeWire server.
+    { name = libpipewire-module-spa-node-factory }
+
+    # Allows creating nodes that run in the context of the
+    # client. Is used by all clients that want to provide
+    # data to PipeWire.
+    { name = libpipewire-module-client-node }
+
+    # Allows creating devices that run in the context of the
+    # client. Is used by the session manager.
+    { name = libpipewire-module-client-device }
+
+    # The portal module monitors the PID of the portal process
+    # and tags connections with the same PID as portal
+    # connections.
+    { name = libpipewire-module-portal
+        flags = [ ifexists nofail ]
+    }
+
+    # The access module can perform access checks and block
+    # new clients.
+    { name = libpipewire-module-access
+        args = {
+            # Socket-specific access permissions
+            #access.socket = { pipewire-0 = "default", pipewire-0-manager = "unrestricted" }
+
+            # Deprecated legacy mode (not socket-based),
+            # for now enabled by default if access.socket is not specified
+            #access.legacy = true
+        }
+        condition = [ { module.access = true } ]
+    }
+
+    # Makes a factory for wrapping nodes in an adapter with a
+    # converter and resampler.
+    { name = libpipewire-module-adapter }
+
+    # Makes a factory for creating links between ports.
+    { name = libpipewire-module-link-factory }
+
+    # Provides factories to make session manager objects.
+    { name = libpipewire-module-session-manager }
+
+    # Use libcanberra to play X11 Bell
+    { name = libpipewire-module-x11-bell
+        args = {
+            #sink.name = "@DEFAULT_SINK@"
+            #sample.name = "bell-window-system"
+            #x11.display = null
+            #x11.xauthority = null
+        }
+        flags = [ ifexists nofail ]
+        condition = [ { module.x11.bell = true } ]
+    }
+    { name = libpipewire-module-jackdbus-detect
+        args = {
+            #jack.library     = libjack.so.0
+            #jack.server      = null
+            #jack.client-name = PipeWire
+            #jack.connect     = true
+            #tunnel.mode      = duplex  # source|sink|duplex
+            source.props = {
+                #audio.channels = 2
+		#midi.ports = 1
+                #audio.position = [ FL FR ]
+                # extra sink properties
+            }
+            sink.props = {
+                #audio.channels = 2
+		#midi.ports = 1
+                #audio.position = [ FL FR ]
+                # extra sink properties
+            }
+        }
+        flags = [ ifexists nofail ]
+        condition = [ { module.jackdbus-detect = true } ]
+    }
+]
+
+context.objects = [
+    #{ factory = <factory-name>
+    #    ( args  = { <key> = <value> ... } )
+    #    ( flags = [ ( nofail ) ] )
+    #    ( condition = [ { <key> = <value> ... } ... ] )
+    #}
+    #
+    # Creates an object from a PipeWire factory with the given parameters.
+    # If nofail is given, errors are ignored (and no object is created).
+    # If condition is given, the object is created only when the context properties
+    # all match the match rules.
+    #
+    #{ factory = spa-node-factory   args = { factory.name = videotestsrc node.name = videotestsrc node.description = videotestsrc "Spa:Pod:Object:Param:Props:patternType" = 1 } }
+    #{ factory = spa-device-factory args = { factory.name = api.jack.device foo=bar } flags = [ nofail ] }
+    #{ factory = spa-device-factory args = { factory.name = api.alsa.enum.udev } }
+    #{ factory = spa-node-factory   args = { factory.name = api.alsa.seq.bridge node.name = Internal-MIDI-Bridge } }
+    #{ factory = adapter            args = { factory.name = audiotestsrc node.name = my-test node.description = audiotestsrc } }
+    #{ factory = spa-node-factory   args = { factory.name = api.vulkan.compute.source node.name = my-compute-source } }
+
+    # A default dummy driver. This handles nodes marked with the "node.always-process"
+    # property when no other driver is currently active. JACK clients need this.
+    { factory = spa-node-factory
+        args = {
+            factory.name    = support.node.driver
+            node.name       = Dummy-Driver
+            node.group      = pipewire.dummy
+            priority.driver = 20000
+            #clock.id       = monotonic # realtime | tai | monotonic-raw | boottime
+            #clock.name     = "clock.system.monotonic"
+        }
+    }
+    { factory = spa-node-factory
+        args = {
+            factory.name    = support.node.driver
+            node.name       = Freewheel-Driver
+            priority.driver = 19000
+            node.group      = pipewire.freewheel
+            node.freewheel  = true
+        }
+    }
+
+    # This creates a new Source node. It will have input ports
+    # that you can link, to provide audio for this source.
+    #{ factory = adapter
+    #    args = {
+    #        factory.name     = support.null-audio-sink
+    #        node.name        = "my-mic"
+    #        node.description = "Microphone"
+    #        media.class      = "Audio/Source/Virtual"
+    #        audio.position   = "FL,FR"
+    #    }
+    #}
+
+    # This creates a single PCM source device for the given
+    # alsa device path hw:0. You can change source to sink
+    # to make a sink in the same way.
+    #{ factory = adapter
+    #    args = {
+    #        factory.name           = api.alsa.pcm.source
+    #        node.name              = "alsa-source"
+    #        node.description       = "PCM Source"
+    #        media.class            = "Audio/Source"
+    #        api.alsa.path          = "hw:0"
+    #        api.alsa.period-size   = 1024
+    #        api.alsa.headroom      = 0
+    #        api.alsa.disable-mmap  = false
+    #        api.alsa.disable-batch = false
+    #        audio.format           = "S16LE"
+    #        audio.rate             = 48000
+    #        audio.channels         = 2
+    #        audio.position         = "FL,FR"
+    #    }
+    #}
+
+    # Use the metadata factory to create metadata and some default values.
+    #{ factory = metadata
+    #    args = {
+    #        metadata.name = my-metadata
+    #        metadata.values = [
+    #            { key = default.audio.sink   value = { name = somesink } }
+    #            { key = default.audio.source value = { name = somesource } }
+    #        ]
+    #    }
+    #}
+]
+
+context.exec = [
+    #{   path = <program-name>
+    #    ( args = "<arguments>" )
+    #    ( condition = [ { <key> = <value> ... } ... ] )
+    #}
+    #
+    # Execute the given program with arguments.
+    # If condition is given, the program is executed only when the context
+    # properties all match the match rules.
+    #
+    # You can optionally start the session manager here,
+    # but it is better to start it as a systemd service.
+    # Run the session manager with -h for options.
+    #
+    #{ path = "/usr/bin/pipewire-media-session" args = ""
+    #  condition = [ { exec.session-manager = null } { exec.session-manager = true } ] }
+    #
+    # You can optionally start the pulseaudio-server here as well
+    # but it is better to start it as a systemd service.
+    # It can be interesting to start another daemon here that listens
+    # on another address with the -a option (eg. -a tcp:4713).
+    #
+    #{ path = "/usr/bin/pipewire" args = "-c pipewire-pulse.conf"
+    #  condition = [ { exec.pipewire-pulse = null } { exec.pipewire-pulse = true } ] }
+]
diff --git a/polybar/date.sh b/polybar/date.sh
new file mode 100755
index 0000000..a8f88e3
--- /dev/null
+++ b/polybar/date.sh
@@ -0,0 +1,10 @@
+#! /bin/bash
+
+CET=$(date +"%H:%M")
+UTC=$(TZ=UTC date +"%H:%M")
+EASTERN=$(TZ=America/New_York date +"%H:%M")
+PACIFIC=$(TZ=America/Los_Angeles date +"%H:%M")
+AWST=$(TZ=Australia/Perth date +"%H:%M")
+DATE=$(date +"%Y-%m-%d")
+
+echo "PST: $PACIFIC   EST: $EASTERN   UTC: $UTC   CET: $CET   AWST: $AWST   $DATE"
diff --git a/polybar/motherbase-config b/polybar/motherbase-config
new file mode 100644
index 0000000..355c6b3
--- /dev/null
+++ b/polybar/motherbase-config
@@ -0,0 +1,308 @@
+;=====================================================
+;
+;   To learn more about how to configure Polybar
+;   go to https://github.com/jaagr/polybar
+;
+;   The README contains alot of information
+;
+;=====================================================
+
+[colors]
+background = #222
+foreground = #AAAAAA
+primary = #4c94af
+ok = #4E9A06
+warning = #E07C00
+alert = #DD1111
+
+[bar/internal]
+monitor = eDP-1
+font-0 = notosans:size=10;0
+font-1 = FontAwesome;0
+
+width = 100%
+height = 27
+offset-x = 0%
+offset-y = 0%
+radius = 0
+fixed-center = false
+
+background = ${colors.background}
+foreground = ${colors.foreground}
+
+line-size = 3
+line-color = #f00
+
+border-size = 0
+border-color = #00000000
+
+padding-left = 0
+padding-right = 0
+
+module-margin-left = 3
+module-margin-right = 3
+
+modules-left = i3
+modules-center =
+modules-right = cpu memory temperature vpnaboutyou wlan aircrack eth eth-c battery0 pavolume date 
+
+tray-position = right
+tray-padding = 3
+tray-maxsize = 0
+
+override-redirect = false
+wm-restack = i3
+
+
+[bar/external]
+inherit = bar/internal
+monitor = DP1-2
+monitor-strict = true
+#modules-left = i3
+#modules-center =
+#modules-right =  date
+
+[bar/hdmi]
+inherit = bar/internal
+monitor = HDMI2
+monitor-strict = true
+#modules-left = i3
+#modules-center =
+modules-right = cpu memory pavolume date
+
+[module/xwindow]
+type = internal/xwindow
+label = %title:0:30:...%
+
+[module/i3]
+type = internal/i3
+format = <label-state> <label-mode>
+index-sort = true
+wrapping-scroll = false
+
+; Only show workspaces on the same output as the bar
+pin-workspaces = true
+
+label-mode-padding = 3
+label-mode-foreground = #000
+label-mode-background = ${colors.foreground}
+
+; focused = Active workspace on focused monitor9f78e1
+label-focused = %icon%
+label-focused-foreground = ${colors.ok}
+label-focused-background = ${colors.background}
+label-focused-underline = ${colors.primary}
+label-focused-padding = 3
+
+; unfocused = Inactive workspace on any monitor
+label-unfocused = %icon%
+label-unfocused-padding = 3
+
+; visible = Active workspace on unfocused monitor
+label-visible = %icon%
+label-visible-background = ${colors.background}
+label-visible-underline = ${colors.foreground}
+label-visible-padding = ${colors.background}
+
+; urgent = Workspace with urgency hint set
+label-urgent = %icon%
+label-urgent-background = ${colors.background}
+label-urgent-underline = ${colors.alert}
+label-urgent-padding = 3
+
+ws-icon-0 = 1;
+ws-icon-1 = 2;
+ws-icon-2 = 3;
+ws-icon-3 = 4;
+ws-icon-4 = 5;
+ws-icon-5 = 6;
+ws-icon-6 = 7;
+ws-icon-7 = 8;
+ws-icon-8 = 9;
+
+
+[module/wlan]
+type = internal/network
+interface = wlp61s0
+interval = 1.0
+
+;format-connected = <ramp-signal> <label-connected>
+
+format-connected-prefix = " "
+format-connected-prefix-foreground = ${colors.ok}
+format-connected = <label-connected>
+label-connected = %essid%
+
+format-disconnected-prefix = " "
+format-disconnected-prefix-foreground = ${colors.warning}
+format-disconnected = 
+
+ramp-signal-0 = 0
+ramp-signal-1 = 1
+ramp-signal-2 = 2
+ramp-signal-3 = 3
+ramp-signal-4 = 4
+ramp-signal-foreground = ${colors.hidden}
+
+[module/aircrack]
+type = internal/network
+interface = wlp61s0mon
+interval = 1.0
+
+format-disconnected-prefix = " "
+format-disconnected-prefix-foreground = ${colors.alert}
+format-disconnected = [Aircrack]
+
+[module/eth]
+type = internal/network
+interface = enp0s31f6
+interval = 5.0
+
+format-connected-underline = ${colors.background}
+format-connected-prefix = " "
+format-connected-prefix-foreground = ${colors.ok}
+format-connected = <label-connected>
+label-connected = %local_ip%
+
+[module/eth-c]
+type = internal/network
+interface = ens4u1u2
+interval = 5.0
+
+format-connected-underline = ${colors.background}
+format-connected-prefix = " "
+format-connected-prefix-foreground = ${colors.ok}
+format-connected = <label-connected>
+label-connected = %local_ip%
+
+[module/vpnaboutyou]
+type = custom/script
+exec = ~/.config/polybar/vpncheck.sh
+internal = 5
+label = %output%
+format = <label>
+
+[module/date]
+type = custom/script
+interval = 1
+
+exec = ~/.config/polybar/date.sh
+
+label = "%output%"
+label-foreground = ${colors.foreground}
+
+format = "  <label>  "
+format-foreground = ${colors.primary}
+
+[module/battery0]
+type = internal/battery
+battery = BAT0
+adapter = AC
+full-at = 99
+
+format-charging-prefix = " "
+format-charging-prefix-foreground = ${colors.primary}
+format-charging = <label-charging>
+
+format-discharging = <ramp-capacity> <label-discharging>
+
+format-full-prefix = " "
+format-full-prefix-foreground = ${colors.ok}
+format-full = <label-full>
+
+ramp-capacity-0 = 
+ramp-capacity-0-foreground = ${colors.alert}
+ramp-capacity-1 = 
+ramp-capacity-1-foreground = ${colors.warning}
+ramp-capacity-2 = 
+ramp-capacity-2-foreground = ${colors.primary}
+ramp-capacity-3 = 
+ramp-capacity-3-foreground = ${colors.primary}
+ramp-capacity-4 = 
+ramp-capacity-4-foreground = ${colors.ok}
+
+time-format = %H:%M
+label-discharging = %percentage%% %time%
+
+[module/temperature]
+type = internal/temperature
+interval = 2
+thermal-zone = 0
+warn-temperature = 60
+
+format-prefix = " "
+format-prefix-foreground = ${colors.ok}
+format = <label>
+
+format-warn-prefix = " "
+format-warn-prefix-foreground = ${colors.warning}
+format-warn = <label-warn>
+
+label = %temperature-c%
+label-warn = %temperature-c%
+
+[module/cpu]
+type = internal/cpu
+interval = 2
+
+format-prefix = "  "
+format-prefix-foreground = ${colors.primary}
+format = <label>
+
+label = %percentage%%
+
+[module/memory]
+type = internal/memory
+
+format-prefix = " "
+format-prefix-foreground = ${colors.primary}
+format = <label>
+
+label = %gb_used%/%gb_total%
+
+[module/pavolume]
+type = custom/script
+interval = 1
+label = %output%
+exec = ~/.config/polybar/pavolume.sh
+click-right = exec pavucontrol
+click-left = ~/.config/polybar/pavolume.sh --togmute
+scroll-up = ~/.config/polybar/pavolume.sh --up
+scroll-down = ~/.config/polybar/pavolume.sh --down
+
+[settings]
+screenchange-reload = true
+
+[global/wm]
+margin-top = 5
+margin-bottom = 5
+
+[module/xbacklight]
+type = internal/xbacklight
+output = eDP1
+enable-scroll = false
+
+Available tags:
+;   <label> (default)
+;   <ramp>
+;   <bar>
+format = <ramp>
+
+; Available tokens:
+;   %percentage% (default)
+label = %percentage%%
+
+; Only applies if <ramp> is used
+ramp-0 = 🌕
+ramp-1 = 🌔
+ramp-2 = 🌓
+ramp-3 = 🌒
+ramp-4 = 🌑
+
+; Only applies if <bar> is used
+bar-width = 10
+bar-indicator = |
+bar-fill = ─
+bar-empty = ─
+
+; vim:ft=dosini
diff --git a/polybar/outerhaven-config b/polybar/outerhaven-config
new file mode 100644
index 0000000..007a2ca
--- /dev/null
+++ b/polybar/outerhaven-config
@@ -0,0 +1,349 @@
+;=====================================================
+;
+;   To learn more about how to configure Polybar
+;   go to https://github.com/jaagr/polybar
+;
+;   The README contains alot of information
+;
+;=====================================================
+
+[colors]
+background = #222
+foreground = #AAAAAA
+primary = #4c94af
+ok = #4E9A06
+warning = #E07C00
+alert = #DD1111
+
+[bar/internal]
+monitor = eDP-1
+monitor-strict = true
+font-0 = notosans:size=10;0
+font-1 = FontAwesome;0
+
+width = 100%
+height = 27
+offset-x = 0%
+offset-y = 0%
+radius = 0
+fixed-center = false
+
+background = ${colors.background}
+foreground = ${colors.foreground}
+
+line-size = 3
+line-color = #f00
+
+border-size = 0
+border-color = #00000000
+
+padding-left = 0
+padding-right = 0
+
+module-margin-left = 3
+module-margin-right = 3
+
+modules-left = i3
+modules-center =
+modules-right = cpu memory temperature vpnaboutyou radio wlan eth battery0 battery1 pavolume xbacklight date
+
+tray-position = right
+tray-padding = 3
+tray-maxsize = 0
+
+override-redirect = false
+wm-restack = i3
+
+[bar/external]
+inherit = bar/internal
+monitor = DP-1-2
+modules-right = cpu memory temperature vpnaboutyou radio wlan eth eth-c pavolume date
+
+[bar/hdmi]
+inherit = bar/external
+monitor = HDMI-2
+monitor-strict = true
+modules-right = cpu memory temperature vpnaboutyou radio wlan eth eth-c pavolume date
+
+[module/xwindow]
+type = internal/xwindow
+label = %title:0:30:...%
+
+[module/i3]
+type = internal/i3
+format = <label-state> <label-mode>
+index-sort = true
+wrapping-scroll = false
+
+; Only show workspaces on the same output as the bar
+pin-workspaces = true
+
+label-mode-padding = 3
+label-mode-foreground = #000
+label-mode-background = ${colors.foreground}
+
+; focused = Active workspace on focused monitor9f78e1
+label-focused = %icon%
+label-focused-foreground = ${colors.ok}
+label-focused-background = ${colors.background}
+label-focused-underline = ${colors.primary}
+label-focused-padding = 3
+
+; unfocused = Inactive workspace on any monitor
+label-unfocused = %icon%
+label-unfocused-padding = 3
+
+; visible = Active workspace on unfocused monitor
+label-visible = %icon%
+label-visible-background = ${colors.background}
+label-visible-underline = ${colors.foreground}
+label-visible-padding = ${colors.background}
+
+; urgent = Workspace with urgency hint set
+label-urgent = %icon%
+label-urgent-background = ${colors.background}
+label-urgent-underline = ${colors.alert}
+label-urgent-padding = 3
+
+ws-icon-0 = 1;
+ws-icon-1 = 2;
+ws-icon-2 = 3;
+ws-icon-3 = 4;
+ws-icon-4 = 5;
+ws-icon-5 = 6;
+ws-icon-6 = 7;
+ws-icon-7 = 8;
+ws-icon-8 = 9;
+
+
+[module/xbacklight]
+type = internal/xbacklight
+
+format = <label>  <bar>
+label = 
+
+bar-width = 10
+bar-indicator = |
+bar-indicator-foreground = #ff
+bar-indicator-font = 1
+bar-fill = ─
+bar-fill-font = 2
+bar-fill-foreground = ${colors.primary}
+bar-empty = ─
+bar-empty-font = 2
+bar-empty-foreground = ${colors.foreground}
+
+[module/wlan]
+type = internal/network
+interface = wlp58s0
+interval = 5.0
+
+;format-connected = <ramp-signal> <label-connected>
+
+format-connected-prefix = " "
+format-connected-prefix-foreground = ${colors.ok}
+format-connected = <label-connected>
+label-connected = %essid%
+
+format-disconnected-prefix = " "
+format-disconnected-prefix-foreground = ${colors.warning}
+format-disconnected = 
+
+ramp-signal-0 = 0
+ramp-signal-1 = 1
+ramp-signal-2 = 2
+ramp-signal-3 = 3
+ramp-signal-4 = 4
+ramp-signal-foreground = ${colors.hidden}
+
+[module/eth]
+type = internal/network
+interface = enp0s31f6
+interval = 5.0
+
+format-connected-underline = ${colors.background}
+format-connected-prefix = " "
+format-connected-prefix-foreground = ${colors.ok}
+format-connected = <label-connected>
+label-connected = %local_ip%
+
+#format-disconnected-prefix = " "
+#format-disconnected-prefix-foreground = ${colors.warning}
+#format-disconnected = 
+
+[module/eth-c]
+type = internal/network
+interface = enp57s0u1u2
+interval = 5.0
+
+format-connected-underline = ${colors.background}
+format-connected-prefix = " "
+format-connected-prefix-foreground = ${colors.ok}
+format-connected = <label-connected>
+label-connected = %local_ip%
+
+#format-disconnected-prefix = " "
+#format-disconnected-prefix-foreground = ${colors.warning}
+#format-disconnected = 
+
+[module/date]
+type = custom/script
+interval = 1
+
+exec = ~/.config/polybar/date.sh
+
+label = "%output%"
+label-foreground = ${colors.foreground}
+
+format = "  <label>  "
+format-foreground = ${colors.primary}
+
+[module/battery0]
+type = internal/battery
+battery = BAT0
+adapter = AC
+full-at = 99
+
+format-charging-prefix = " "
+format-charging-prefix-foreground = ${colors.primary}
+format-charging = <label-charging>
+
+format-discharging = <ramp-capacity> <label-discharging>
+
+format-full-prefix = " "
+format-full-prefix-foreground = ${colors.ok}
+format-full = <label-full>
+
+ramp-capacity-0 = 
+ramp-capacity-0-foreground = ${colors.alert}
+ramp-capacity-1 = 
+ramp-capacity-1-foreground = ${colors.warning}
+ramp-capacity-2 = 
+ramp-capacity-2-foreground = ${colors.primary}
+ramp-capacity-3 = 
+ramp-capacity-3-foreground = ${colors.primary}
+ramp-capacity-4 = 
+ramp-capacity-4-foreground = ${colors.ok}
+
+time-format = %H:%M
+label-discharging = %percentage%% %time%
+
+[module/battery1]
+type = internal/battery
+battery = BAT1
+adapter = AC
+full-at = 99
+
+format-charging-prefix = " "
+format-charging-prefix-foreground = ${colors.primary}
+format-charging = <label-charging>
+
+format-discharging = <ramp-capacity> <label-discharging>
+
+format-full-prefix = " "
+format-full-prefix-foreground = ${colors.ok}
+format-full = <label-full>
+
+ramp-capacity-0 = 
+ramp-capacity-0-foreground = ${colors.alert}
+ramp-capacity-1 = 
+ramp-capacity-1-foreground = ${colors.warning}
+ramp-capacity-2 = 
+ramp-capacity-2-foreground = ${colors.primary}
+ramp-capacity-3 = 
+ramp-capacity-3-foreground = ${colors.primary}
+ramp-capacity-4 = 
+ramp-capacity-4-foreground = ${colors.ok}
+
+time-format = %H:%M
+label-discharging = %percentage%% %time%
+
+[module/temperature]
+type = internal/temperature
+interval = 2
+thermal-zone = 0
+warn-temperature = 60
+
+format-prefix = " "
+format-prefix-foreground = ${colors.ok}
+format = <label>
+
+format-warn-prefix = " "
+format-warn-prefix-foreground = ${colors.warning}
+format-warn = <label-warn>
+
+label = %temperature-c%
+label-warn = %temperature-c%
+
+[module/cpu]
+type = internal/cpu
+interval = 2
+
+format-prefix = "  "
+format-prefix-foreground = ${colors.primary}
+format = <label>
+
+; Available tokens:
+;   %percentage% (default) - total cpu load
+;   %percentage-cores% - load percentage for each core
+;   %percentage-core[1-9]% - load percentage for specific core
+label = %percentage%%
+
+[module/memory]
+type = internal/memory
+
+; Available tags:
+;   <label> (default)
+;   <bar-used>
+;   <bar-free>
+format-prefix = " "
+format-prefix-foreground = ${colors.primary}
+format = <label>
+
+; Available tokens:
+;   %percentage_used% (default)
+;   %percentage_free%
+;   %gb_used%
+;   %gb_free%
+;   %gb_total%
+;   %mb_used%
+;   %mb_free%
+;   %mb_total%
+label = %gb_used%/%gb_total%
+
+[module/pavolume]
+type = custom/script
+interval = 1
+label = %output%
+exec = ~/.config/polybar/pavolume.sh
+click-right = exec pavucontrol
+click-left = ~/.config/polybar/pavolume.sh --togmute
+scroll-up = ~/.config/polybar/pavolume.sh --up
+scroll-down = ~/.config/polybar/pavolume.sh --down
+
+[module/vpnaboutyou]
+type = custom/script
+exec = ~/.config/polybar/vpncheck.sh
+interval = 5
+label = %output%
+format = <label>
+
+[module/radio]
+type = custom/script
+exec = ~/.config/polybar/modem.sh
+interval = 5
+label = %output%
+format = <label>
+
+[settings]
+screenchange-reload = true
+;compositing-background = xor
+;compositing-background = screen
+;compositing-foreground = source
+;compositing-border = over
+
+[global/wm]
+margin-top = 5
+margin-bottom = 5
+
+; vim:ft=dosini
diff --git a/polybar/shadowmoses-config b/polybar/shadowmoses-config
new file mode 100644
index 0000000..4843344
--- /dev/null
+++ b/polybar/shadowmoses-config
@@ -0,0 +1,299 @@
+;=====================================================
+;
+;   To learn more about how to configure Polybar
+;   go to https://github.com/jaagr/polybar
+;
+;   The README contains alot of information
+;
+;=====================================================
+
+[colors]
+background = #222
+foreground = #AAAAAA
+primary = #4c94af
+ok = #4E9A06
+warning = #E07C00
+alert = #DD1111
+
+[bar/main]
+monitor = eDP
+monitor-strict = true
+font-0 = notosans:size=10;0
+font-1 = FontAwesome;0
+
+width = 100%
+height = 27
+offset-x = 0%
+offset-y = 0%
+radius = 0
+fixed-center = false
+
+background = ${colors.background}
+foreground = ${colors.foreground}
+
+line-size = 3
+line-color = #f00
+
+border-size = 0
+border-color = #00000000
+
+padding-left = 0
+padding-right = 0
+
+module-margin-left = 3
+module-margin-right = 3
+
+modules-left = i3
+modules-center =
+modules-right = cpu memory temp1 temp2 wlan eth eth-c battery0 volume date
+
+tray-position = right
+tray-padding = 3
+tray-maxsize = 16
+
+override-redirect = false
+wm-restack = i3
+
+[bar/quadhd_left]
+monitor = DisplayPort-0
+inherit = bar/main
+
+[bar/quadhd_right]
+monitor = DisplayPort-1
+inherit = bar/main
+
+[module/xwindow]
+type = internal/xwindow
+label = %title:0:30:...%
+
+[module/i3]
+type = internal/i3
+format = <label-state> <label-mode>
+index-sort = true
+wrapping-scroll = false
+
+; Only show workspaces on the same output as the bar
+pin-workspaces = true
+
+label-mode-padding = 3
+label-mode-foreground = #000
+label-mode-background = ${colors.foreground}
+
+; focused = Active workspace on focused monitor9f78e1
+label-focused = %icon%
+label-focused-foreground = ${colors.ok}
+label-focused-background = ${colors.background}
+label-focused-underline = ${colors.primary}
+label-focused-padding = 3
+
+; unfocused = Inactive workspace on any monitor
+label-unfocused = %icon%
+label-unfocused-padding = 3
+
+; visible = Active workspace on unfocused monitor
+label-visible = %icon%
+label-visible-background = ${colors.background}
+label-visible-underline = ${colors.foreground}
+label-visible-padding = ${colors.background}
+
+; urgent = Workspace with urgency hint set
+label-urgent = %icon%
+label-urgent-background = ${colors.background}
+label-urgent-underline = ${colors.alert}
+label-urgent-padding = 3
+
+ws-icon-0 = 1;
+ws-icon-1 = 2;
+ws-icon-2 = 3;
+ws-icon-3 = 4;
+ws-icon-4 = 5;
+ws-icon-5 = 6;
+ws-icon-6 = 7;
+ws-icon-7 = 8;
+ws-icon-8 = 9;
+
+
+[module/wlan]
+type = internal/network
+interface = wlp3s0
+interval = 5.0
+
+;format-connected = <ramp-signal> <label-connected>
+
+format-connected-prefix = " "
+format-connected-prefix-foreground = ${colors.ok}
+format-connected = <label-connected>
+label-connected = %essid%
+
+format-disconnected-prefix = " "
+format-disconnected-prefix-foreground = ${colors.warning}
+format-disconnected = 
+
+ramp-signal-0 = 0
+ramp-signal-1 = 1
+ramp-signal-2 = 2
+ramp-signal-3 = 3
+ramp-signal-4 = 4
+ramp-signal-foreground = ${colors.hidden}
+
+[module/eth]
+type = internal/network
+interface = enp5s0
+interval = 5.0
+
+format-connected-underline = ${colors.background}
+format-connected-prefix = " "
+format-connected-prefix-foreground = ${colors.ok}
+format-connected = <label-connected>
+label-connected = %local_ip%
+
+#format-disconnected-prefix = " "
+#format-disconnected-prefix-foreground = ${colors.warning}
+#format-disconnected = 
+
+[module/eth-c]
+type = internal/network
+interface = enp5s0f3u1u4
+interval = 5.0
+
+format-connected-underline = ${colors.background}
+format-connected-prefix = " "
+format-connected-prefix-foreground = ${colors.ok}
+format-connected = <label-connected>
+label-connected = %local_ip%
+
+#format-disconnected-prefix = " "
+#format-disconnected-prefix-foreground = ${colors.warning}
+#format-disconnected = 
+
+[module/date]
+type = custom/script
+interval = 1
+
+exec = ~/.config/polybar/date.sh
+
+label = "%output%"
+label-foreground = ${colors.foreground}
+
+format = "  <label>  "
+format-foreground = ${colors.primary}
+
+[module/battery0]
+type = internal/battery
+battery = BAT0
+adapter = AC
+full-at = 99
+
+format-charging-prefix = " "
+format-charging-prefix-foreground = ${colors.primary}
+format-charging = <label-charging>
+
+format-discharging = <ramp-capacity> <label-discharging>
+
+format-full-prefix = " "
+format-full-prefix-foreground = ${colors.ok}
+format-full = <label-full>
+
+ramp-capacity-0 = 
+ramp-capacity-0-foreground = ${colors.alert}
+ramp-capacity-1 = 
+ramp-capacity-1-foreground = ${colors.warning}
+ramp-capacity-2 = 
+ramp-capacity-2-foreground = ${colors.primary}
+ramp-capacity-3 = 
+ramp-capacity-3-foreground = ${colors.primary}
+ramp-capacity-4 = 
+ramp-capacity-4-foreground = ${colors.ok}
+
+time-format = %H:%M
+label-discharging = %percentage%% %time%
+
+[module/temperature]
+type = internal/temperature
+interval = 2
+warn-temperature = 70
+
+format-prefix = " "
+format-prefix-foreground = ${colors.ok}
+format = <label>
+
+format-warn-prefix = " "
+format-warn-prefix-foreground = ${colors.warning}
+format-warn = <label-warn>
+
+label = %temperature-c%
+label-warn = %temperature-c%
+
+[module/temp1]
+hwmon-path = /sys/devices/platform/thinkpad_hwmon/hwmon/hwmon5/temp1_input
+inherit = module/temperature
+
+[module/temp2]
+hwmon-path = /sys/devices/platform/thinkpad_hwmon/hwmon/hwmon6/temp1_input
+inherit = module/temperature
+
+[module/cpu]
+type = internal/cpu
+interval = 2
+
+format-prefix = "  "
+format-prefix-foreground = ${colors.primary}
+format = <label>
+
+; Available tokens:
+;   %percentage% (default) - total cpu load
+;   %percentage-cores% - load percentage for each core
+;   %percentage-core[1-9]% - load percentage for specific core
+label = %percentage%%
+
+[module/memory]
+type = internal/memory
+
+; Available tags:
+;   <label> (default)
+;   <bar-used>
+;   <bar-free>
+format-prefix = " "
+format-prefix-foreground = ${colors.primary}
+format = <label>
+
+; Available tokens:
+;   %percentage_used% (default)
+;   %percentage_free%
+;   %gb_used%
+;   %gb_free%
+;   %gb_total%
+;   %mb_used%
+;   %mb_free%
+;   %mb_total%
+label = %gb_used%/%gb_total%
+
+[module/volume]
+type = custom/script
+interval = 1
+label = %output%
+exec = ~/.config/polybar/volume.sh
+click-right = exec pavucontrol
+click-left = ~/.config/polybar/volume.sh --mute
+scroll-up = ~/.config/polybar/volume.sh --up
+scroll-down = ~/.config/polybar/volume.sh --down
+
+#[module/vpn]
+#type = custom/script
+#exec = ~/.config/polybar/vpncheck.sh
+#interval = 5
+#label = %output%
+#format = <label>
+
+[settings]
+screenchange-reload = true
+;compositing-background = xor
+;compositing-background = screen
+;compositing-foreground = source
+;compositing-border = over
+
+[global/wm]
+margin-top = 5
+margin-bottom = 5
+
+; vim:ft=dosini
diff --git a/polybar/volume.sh b/polybar/volume.sh
new file mode 100755
index 0000000..ab77456
--- /dev/null
+++ b/polybar/volume.sh
@@ -0,0 +1,37 @@
+#! /bin/bash
+
+VOLUME=$(wpctl get-volume @DEFAULT_AUDIO_SINK@ 2>/dev/null | cut -d' ' -f2)
+VOLUME_MUTE=$(wpctl get-volume @DEFAULT_AUDIO_SINK@ 2>/dev/null | cut -d' ' -f3)
+
+function BLUETOOTH {
+  bt_device=$(bt-device -l | tail -n+2 | awk '{ print $1 }')
+
+  for device in $bt_device
+  do
+    connection=$(bt-device -i "$device" 2>/dev/null | grep Connected | awk '{ print $2 }')
+    if [[ $connection -eq 1 ]]
+    then
+      bluetooth=1
+    fi
+  done
+}
+
+VOLUME_PERCENT=$(echo "$VOLUME * 100 / 1" | bc)
+BLUETOOTH
+
+if [[ $VOLUME_MUTE = "[MUTED]" ]]
+then
+  if [[ $bluetooth -ne 0 ]]
+  then
+    echo "%{F#E07C00} %{F-} $VOLUME_PERCENT%"
+  else
+    echo "%{F#E07C00}%{F-} $VOLUME_PERCENT%"
+  fi
+else
+  if [[ $bluetooth -ne 0 ]]
+  then
+    echo "%{F#4E9A06} %{F-} $VOLUME_PERCENT%"
+  else
+    echo "%{F#4E9A06}%{F-} $VOLUME_PERCENT%"
+  fi
+fi
diff --git a/restic/shadowmoses.env b/restic/shadowmoses.env
new file mode 100644
index 0000000..c10f936
--- /dev/null
+++ b/restic/shadowmoses.env
@@ -0,0 +1,4 @@
+RESTIC_PASSWORD_COMMAND="/usr/bin/vault kv get -field key services/restic/shadowmoses"
+RESTIC_REPOSITORY=sftp:backup:shadowmoses
+SSH_AUTH_SOCK=/run/user/1000/ssh-agent.socket
+VAULT_ADDR=https://vault.chaos.sh:443
diff --git a/restic/shadowmoses.exclude b/restic/shadowmoses.exclude
new file mode 100644
index 0000000..a0f8a51
--- /dev/null
+++ b/restic/shadowmoses.exclude
@@ -0,0 +1,4 @@
+/home/lis/.cache
+/home/lis/.local/share
+/home/lis/pictures/nas
+/home/lis/movies/nas
diff --git a/restic/shadowmoses.fish b/restic/shadowmoses.fish
new file mode 100644
index 0000000..c08e470
--- /dev/null
+++ b/restic/shadowmoses.fish
@@ -0,0 +1,2 @@
+set -x RESTIC_PASSWORD_COMMAND "/usr/bin/vault kv get -field key services/restic/shadowmoses"
+set -x RESTIC_REPOSITORY sftp:backup:shadowmoses
diff --git a/restic/shadowmoses.include b/restic/shadowmoses.include
new file mode 100644
index 0000000..4b9948d
--- /dev/null
+++ b/restic/shadowmoses.include
@@ -0,0 +1 @@
+/home/lis
diff --git a/starship.toml b/starship.toml
index 36a5f8b..8248ff2 100644
--- a/starship.toml
+++ b/starship.toml
@@ -129,7 +129,7 @@ truncation_symbol = "…/"
 # "Important 󰈙 " = " 󰈙 "
 
 [git_branch]
-symbol = ""
+symbol = "󰊤 "
 only_attached = true
 style = "fg:color_git_fg bg:color_git_bg"
 format = '[ $symbol $branch]($style)'
@@ -166,12 +166,12 @@ conflicted = '=${count} '
 format = '[ $all_status$ahead_behind]($style)'
 
 [golang]
-symbol = ""
+symbol = ""
 style = "fg:color_code_fg bg:color_code_bg"
 format = '[ $symbol ($version) ]($style)'
 
 [python]
-symbol = ""
+symbol = ""
 style = "fg:color_code_fg bg:color_code_bg"
 format = '[ $symbol ($virtualenv)($version) ]($style)'
 pyenv_version_name = true
diff --git a/symlink.sh b/symlink.sh
new file mode 100644
index 0000000..2eee4a0
--- /dev/null
+++ b/symlink.sh
@@ -0,0 +1,5 @@
+#! /bin/bash
+
+ln -s ./tmux/tmux.conf ~/.tmux.conf
+ln -s ./nvim/init.vim ~/.vimrc
+ln -s ./zsh/zshrc ~/.zshrc
diff --git a/systemd/user/feh.service b/systemd/user/feh.service
new file mode 100644
index 0000000..5980a8c
--- /dev/null
+++ b/systemd/user/feh.service
@@ -0,0 +1,12 @@
+[Unit]
+Description=feh
+After=xorg.target
+Requires=xorg.target
+
+[Service]
+Environment="DISPLAY=:0"
+Restart=on-failure
+ExecStart=/home/lis/.config/feh/%H-random
+
+[Install]
+WantedBy=default.target
diff --git a/systemd/user/feh.timer b/systemd/user/feh.timer
new file mode 100644
index 0000000..81f85b9
--- /dev/null
+++ b/systemd/user/feh.timer
@@ -0,0 +1,9 @@
+[Unit]
+Description=Change Wallpaper every 30min
+
+[Timer]
+OnCalendar=*:0/30
+Persistent=false
+
+[Install]
+WantedBy=timers.target
diff --git a/systemd/user/keyboard.service b/systemd/user/keyboard.service
new file mode 100644
index 0000000..0e3335f
--- /dev/null
+++ b/systemd/user/keyboard.service
@@ -0,0 +1,14 @@
+[Unit]
+Description=keyboard refreh time and keymapping
+After=xorg.target
+Requires=xorg.target
+
+[Service]
+Environment="DISPLAY=:0"
+Restart=always
+RestartSec=5
+ExecStartPre=/usr/bin/xset r rate 200 60
+ExecStart=/usr/bin/xmodmap /home/lis/.esc_caps
+
+[Install]
+WantedBy=default.target
diff --git a/systemd/user/libinput@.service b/systemd/user/libinput@.service
new file mode 100644
index 0000000..ca9cf24
--- /dev/null
+++ b/systemd/user/libinput@.service
@@ -0,0 +1,13 @@
+[Unit]
+Description=mouse speed
+After=xorg.target
+Requires=xorg.target
+
+[Service]
+Environment="DISPLAY=:0"
+Restart=on-failure
+#RestartSec=5
+ExecStart=/usr/bin/xinput set-prop %i 'libinput Accel Speed' 0.5
+
+[Install]
+WantedBy=default.target
diff --git a/systemd/user/picom.service b/systemd/user/picom.service
new file mode 100644
index 0000000..077cea8
--- /dev/null
+++ b/systemd/user/picom.service
@@ -0,0 +1,13 @@
+[Unit]
+Description=picom
+After=xorg.target
+Requires=xorg.target
+
+[Service]
+Environment="DISPLAY=:0"
+Restart=on-failure
+#RestartSec=5
+ExecStart=/usr/bin/picom -c
+
+[Install]
+WantedBy=default.target
diff --git a/systemd/user/polybar@.service b/systemd/user/polybar@.service
new file mode 100644
index 0000000..85455e8
--- /dev/null
+++ b/systemd/user/polybar@.service
@@ -0,0 +1,14 @@
+[Unit]
+Description=polybar
+After=xorg.target
+Requires=xorg.target
+
+[Service]
+Environment="DISPLAY=:0"
+Restart=always
+RestartSec=5
+ExecStart=/usr/bin/polybar -c /home/lis/.config/polybar/%H-config %i
+KillSignal=SIGKILL
+
+[Install]
+WantedBy=default.target
diff --git a/systemd/user/redshift.service b/systemd/user/redshift.service
new file mode 100644
index 0000000..d007828
--- /dev/null
+++ b/systemd/user/redshift.service
@@ -0,0 +1,12 @@
+[Unit]
+Description=redshift display filter
+After=xorg.target
+Requires=xorg.target
+
+[Service]
+Environment="DISPLAY=:0"
+Restart=on-failure
+ExecStart=/usr/bin/redshift -l 53.5488:9.9872
+
+[Install]
+WantedBy=default.target
diff --git a/systemd/user/restic@.service b/systemd/user/restic@.service
new file mode 100644
index 0000000..a9501c2
--- /dev/null
+++ b/systemd/user/restic@.service
@@ -0,0 +1,10 @@
+[Unit]
+Description=daily backup of home directory
+After=xorg.target
+Requires=xorg.target
+
+[Service]
+EnvironmentFile=/home/lis/.config/restic/%I.env
+ExecStartPre=/home/lis/.local/bin/vault-sshadd backup-restic
+ExecStart=/usr/bin/restic backup --verbose --exclude-file /home/lis/.config/restic/%I.exclude --files-from /home/lis/.config/restic/%I.include
+Type=oneshot
diff --git a/systemd/user/restic@.timer b/systemd/user/restic@.timer
new file mode 100644
index 0000000..afe8354
--- /dev/null
+++ b/systemd/user/restic@.timer
@@ -0,0 +1,9 @@
+[Unit]
+Description=Run daily backup
+
+[Timer]
+OnCalendar=daily
+Persistent=true
+
+[Install]
+WantedBy=timers.target
diff --git a/systemd/user/ssh-agent.service b/systemd/user/ssh-agent.service
new file mode 100644
index 0000000..8c73f58
--- /dev/null
+++ b/systemd/user/ssh-agent.service
@@ -0,0 +1,10 @@
+[Unit]
+Description=OpenSSH private key agent
+
+[Service]
+Type=forking
+Environment=SSH_AUTH_SOCK=%t/ssh-agent.socket
+ExecStart=/usr/bin/ssh-agent -a $SSH_AUTH_SOCK
+
+[Install]
+WantedBy=default.target
diff --git a/systemd/user/synergys.service b/systemd/user/synergys.service
new file mode 100644
index 0000000..7f5eb33
--- /dev/null
+++ b/systemd/user/synergys.service
@@ -0,0 +1,10 @@
+[Unit]
+Description=Synergy Server Daemon
+After=network.target
+
+[Service]
+ExecStart=/usr/bin/synergys --no-daemon --config /home/lis/.config/synergy/config --enable-crypto
+Restart=on-failure
+
+[Install]
+WantedBy=default.target
diff --git a/systemd/user/timers.target.wants/feh.timer b/systemd/user/timers.target.wants/feh.timer
new file mode 120000
index 0000000..4debe6d
--- /dev/null
+++ b/systemd/user/timers.target.wants/feh.timer
@@ -0,0 +1 @@
+/home/lis/.config/systemd/user/feh.timer
\ No newline at end of file
diff --git a/systemd/user/timers.target.wants/restic@shadowmoses.timer b/systemd/user/timers.target.wants/restic@shadowmoses.timer
new file mode 120000
index 0000000..f3870bd
--- /dev/null
+++ b/systemd/user/timers.target.wants/restic@shadowmoses.timer
@@ -0,0 +1 @@
+/home/lis/.config/systemd/user/restic@.timer
\ No newline at end of file
diff --git a/systemd/user/touchpad.service b/systemd/user/touchpad.service
new file mode 100644
index 0000000..e4aa460
--- /dev/null
+++ b/systemd/user/touchpad.service
@@ -0,0 +1,13 @@
+[Unit]
+Description=disable touchpad on login
+After=xorg.target
+Requires=xorg.target
+
+[Service]
+Environment="DISPLAY=:0"
+Restart=on-failure
+RestartSec=5
+ExecStart=/usr/bin/xinput disable "Elan Touchpad"
+
+[Install]
+WantedBy=default.target
diff --git a/systemd/user/xorg.target b/systemd/user/xorg.target
new file mode 100644
index 0000000..ce7dae6
--- /dev/null
+++ b/systemd/user/xorg.target
@@ -0,0 +1,2 @@
+[Unit]
+Description=The basic Xorg server
diff --git a/systemd/user/xset.service b/systemd/user/xset.service
new file mode 100644
index 0000000..0187841
--- /dev/null
+++ b/systemd/user/xset.service
@@ -0,0 +1,15 @@
+[Unit]
+Description=xset options like no screen off and no bell in terminal
+After=xorg.target
+Requires=xorg.target
+
+[Service]
+Environment="DISPLAY=:0"
+Type=oneshot
+Restart=on-failure
+RestartSec=5
+ExecStartPre=/usr/bin/xset -dpms s off
+ExecStart=/usr/bin/xset -b
+
+[Install]
+WantedBy=default.target
diff --git a/tmux/tmux.conf b/tmux/tmux.conf
new file mode 100644
index 0000000..8e629d7
--- /dev/null
+++ b/tmux/tmux.conf
@@ -0,0 +1,124 @@
+# remap prefix from 'C-b' to 'C-a'
+unbind C-b
+set-option -g prefix C-a
+bind-key C-a send-prefix
+
+# split panes using | and -
+bind | split-window -h
+bind - split-window -v
+unbind '"'
+unbind %
+
+# reload config file (change file location to your the tmux.conf you want to use)
+bind r source-file ~/.tmux.conf
+bind -n C-s new-session
+bind -n M-T new-window
+unbind -n C-w
+
+# switch panes using Alt-arrow without prefix
+bind -n M-j select-pane -L
+bind -n M-l select-pane -R
+bind -n M-i select-pane -U
+bind -n M-k select-pane -D
+bind -n M-left select-pane -L
+bind -n M-right select-pane -R
+bind -n M-up select-pane -U
+bind -n M-down select-pane -D
+
+# Enable mouse mode (tmux 2.1 and above)
+set -g mouse on
+
+# don't rename windows automatically
+set-option -g allow-rename off
+
+# set escape time to 0
+set -sg escape-time 100
+
+# set base index from 0 to 1
+set -g base-index 1
+set -g pane-base-index 1
+
+######################
+### DEFAULT CONFIG ###
+######################
+
+#rename-window 'general'
+#split-window -v 90 -t 0
+#split-window -h
+
+######################
+### DESIGN CHANGES ###
+######################
+
+# panes
+set -g pane-border-style bg=black,fg=brightred
+
+## Status bar design
+# status line
+set -g status-justify left
+set -g status-bg default
+set -g status-fg colour12
+set -g status-interval 2
+
+# messaging
+set -g message-style bg=yellow,fg=black
+set -g message-command-style bg=black,fg=blue
+
+#window mode
+setw -g mode-style bg=colour6,fg=colour0
+
+# window status
+setw -g window-status-format " #F#I:#W#F "
+setw -g window-status-current-format " #F#I:#W#F "
+setw -g window-status-format "#[fg=magenta]#[bg=black] #I #[bg=cyan]#[fg=colour8] #W "
+setw -g window-status-current-format "#[bg=brightmagenta]#[fg=colour8] #I #[fg=colour8]#[bg=colour14] #W "
+setw -g window-status-current-style bg=colour0,fg=colour11,dim
+setw -g window-status-style bg=green,fg=black,reverse
+
+# Info on left (I don't have a session display for now)
+set -g status-left ''
+
+# loud or quiet?
+set-option -g visual-activity off
+set-option -g visual-bell off
+set-option -g visual-silence off
+set-window-option -g monitor-activity off
+set-option -g bell-action none
+
+set -g default-terminal "screen-256color"
+
+# The modes {
+setw -g clock-mode-colour colour135
+setw -g mode-style bg=colour238,fg=colour196,bold
+
+# }
+# The panes {
+
+set -g pane-border-style bg=colour235,fg=colour238
+set -g pane-active-border-style bg=colour236,fg=colour51
+
+# }
+# The statusbar {
+
+set -g status-position bottom
+set -g status-style bg=colour234,fg=colour137,dim
+set -g status-left ''
+set -g status-right '#[fg=colour233,bg=colour241,bold] %d/%m #[fg=colour233,bg=colour245,bold] %H:%M:%S '
+set -g status-right-length 50
+set -g status-left-length 20
+
+setw -g window-status-current-style bg=colour238,fg=colour81,bold
+setw -g window-status-current-format ' #I#[fg=colour250]:#[fg=colour255]#W#[fg=colour50]#F '
+
+setw -g window-status-style bg=colour235,fg=colour138
+setw -g window-status-format ' #I#[fg=colour237]:#[fg=colour250]#W#[fg=colour244]#F '
+
+setw -g window-status-bell-style bg=colour1,fg=colour255,bold
+
+# }
+# The messages {
+
+set -g message-style bg=colour166,fg=colour232,bold
+
+# }
+